Ultrium 3000 internal SAS-2 LTO-5 drive with Gen10 Smart Array controllers in Mixed mode

ShutterX — Mon, 19 Apr 2021 15:48:21 GMT

Gen10 controllers p408i, e208i allow for mixed mode.

1. e208i is listed as compatible with the Ultrium 3000 LTO-5 drive, is p408i compatible too?

2. Will the controller(s) work in mixed mode with the Ultrium drive (HBA) and a Raid of SAS-3 disks? Will the Raid work in SAS-3, with the drive in SAS-2, or will the Raid be 'degraded' to SAS-2?

If it works any guide on how to set-it up?

Re: Ultrium 3000 internal SAS-2 LTO-5 drive with Gen10 Smart Array controllers in Mixed mode

SanjeevGoyal — Tue, 18 May 2021 03:04:54 GMT

Hello,

This is very old LTO drive, this is not supported by Gen10 server.

I hope the below links will help you for more clarifications.

https://support.hpe.com/hpesc/public/docDisplay?docId=c05156494&docLocale=en_US

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c05156638

https://support.hpe.com/hpesc/public/docDisplay?docId=c02095534&docLocale=en_US

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00008185enw#

http://itdoc.hitachi.co.jp/manuals/ha8000v/hard/Gen10/SA/879006-002_en.pdf

https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04123270.pdf

If you feel this was helpful please click the KUDOS! thumb below!

Regards,

topic Ultrium 3000 internal SAS-2 LTO-5 drive with Gen10 Smart Array controllers in Mixed mode in Array Setup and Networking

Ultrium 3000 internal SAS-2 LTO-5 drive with Gen10 Smart Array controllers in Mixed mode

Re: Ultrium 3000 internal SAS-2 LTO-5 drive with Gen10 Smart Array controllers in Mixed mode