topic Re: Hp smart array without reboot in Array Setup and Networking

Hp smart array without reboot

ryoukarla — Tue, 03 May 2022 09:22:22 GMT

Anyway to access the hp smart array utility without doixender ng a reboot? Got new hard drives and don't want to have even a min of downtime. And I want the raid setup through the smart array by hp. omegle

Query: Hp smart array without reboot

support_s — Sat, 23 Apr 2022 10:07:20 GMT

System recommended content:

1. Advisory: HP ProLiant BL460c Gen8 Server - "1798-Slot 0 Drive Array - Array Accelerator Self-Test Error Occurred. Array Accelerator Is Disabled" Message Displayed if the Server Is Booted Without the Smart Array P220i Controller NAND Flash Module Installed

2. Advisory: (Revision) HP Storage Agents for Windows 8.40 (or Earlier)- An Event and SNMP Trap Are Issued After Every Windows Reboot on Servers Using Smart Array Controllers in Zero Memory Mode (ZMR)

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: Hp smart array without reboot

Cali — Mon, 25 Apr 2022 10:49:47 GMT

Hi,

yes, there is a Software Configuration Tool that you can use to create/manage the Raid Online.
It depends on your Server/Array Controller Model and your Operating System.

You did not provide any details about it, so we can not give you a direct link.

But here is an example:

Software Details - HP ProLiant Array Configuration Utility for Windows 64-bit | HPE Support

Cali