topic Re: Firmware Upgrade in Array Setup and Networking

Firmware Upgrade

gralf — Thu, 22 Sep 2022 04:32:36 GMT

I would like to update the firmware on my Nimble device before completing the configuration.

Config: HF40-QF-42T-5760F

Software ver: 6.0.0.300-956221-opt

Device will not have Internet Access.

Directed to this board by HPE Support.

Thank you!

Re: Firmware Upgrade

giladzzz — Wed, 21 Sep 2022 05:36:21 GMT

you can do this. first you have to contact nimble support. and explain you are not connected and you want to download

the version you want. you must supply your Nimble serial number to do this.

Then you can connect with CLI to the Nimble you must give it an IP address and you can upload the firmware and then update the Nimble. you can do this by mail to support@nimblestorage.com

Regards

Give a KUDO if this helps

Re: Firmware Upgrade

Sheldon Smith — Wed, 21 Sep 2022 15:40:10 GMT

CLI? You can have it download from the Internet and update once it's downloaded.

For this you need the GUI to upload the file to the array. Then you can use either the GUI or CLI to update.

Regards,