https://community.hpe.com/t5/array-setup-and-networking/dhci-vmotion-network/m-p/7204346#M3351 <P>In general VMware worlds, vmotion does not have to be separated.</P><P>Storage networks do (like vSAN)</P><P>In a normal network you depent on the NIOC setting to use the QOS function of that function.</P><P>Not sure if alettra requres this.</P><P>HR</P> Thu, 11 Jan 2024 19:36:44 GMT hruis 2024-01-11T19:36:44Z https://community.hpe.com/t5/array-setup-and-networking/dhci-vmotion-network/m-p/7204242#M3350 <P>when deploying a new alettra / dhci i'm not seeing any dedcicated vmotion network in the vmware switching / vm port groups .&nbsp;</P><P>does the initial dhci deployment just assume to use the management port group for vmotion network?</P><P>&nbsp;</P><P>is it recomended to create dedcated vmtion port group?</P><P>&nbsp;</P><P>what is the common approach here?</P><P>&nbsp;</P><P>thanks&nbsp;</P> Fri, 12 Jan 2024 04:01:03 GMT https://community.hpe.com/t5/array-setup-and-networking/dhci-vmotion-network/m-p/7204242#M3350 blackstark 2024-01-12T04:01:03Z https://community.hpe.com/t5/array-setup-and-networking/dhci-vmotion-network/m-p/7204346#M3351 <P>In general VMware worlds, vmotion does not have to be separated.</P><P>Storage networks do (like vSAN)</P><P>In a normal network you depent on the NIOC setting to use the QOS function of that function.</P><P>Not sure if alettra requres this.</P><P>HR</P> Thu, 11 Jan 2024 19:36:44 GMT https://community.hpe.com/t5/array-setup-and-networking/dhci-vmotion-network/m-p/7204346#M3351 hruis 2024-01-11T19:36:44Z