topic Re: Query: Replace all drives HF20 Storage Array in Array Setup and Networking

Replace all drives HF20 Storage Array

WalterGatewood — Thu, 17 Apr 2025 02:22:11 GMT

We have an HF20 with 21x1TB drives and 6x480GB SSD cache. I'm trying to figure out the feasability of upgrading the main drives to ones with a larger capacity. There is no data on the array as its never been used. Is it possible to replace drives one at a time and have the OS replicate or can all the drives be replaces and the OS reinstalled?

Re: Replace all drives HF20 Storage Array

Mahesh202 — Wed, 16 Apr 2025 16:06:35 GMT

Hi WalterGatewood

HPE recommends using the Maintenance Window functionality within the HPE InfoSight portal to inform HPE Support of upcoming maintenance windows.
You may use these documents for reference:
1. Array Upgrade (Online)
2. Hardware Guide CS1000H, CS1000, CS3000, CS5000, CS7000, SF100, SF300, ES2-H, ES2-AFS2, SF-ES2 - Upgrade HDDs

Also, I request you to go through the KB article shared using this link

"https://support.hpe.com/hpesc/public/docDisplay?docId=psg000047aen_us&page=GUID-EE490D20-12C4-4FE9-895A-250EBEE2E2B3.html&docLocale=en_US"
The video talks about replacing the hard disk drives, Also, there is a step-by-step procedure mentioned below.

Hope this helps!!

Regards
Mahesh.

Re: Replace all drives HF20 Storage Array

buzzsubash — Fri, 18 Apr 2025 00:52:32 GMT

Hello,

Usually, the rebuild would take a while and causes slightly high latency due to the backed operations. In this case, it should not be a problem as you do not have any data in the array.

There is no option to reinstall the OS, it has to be a re-image, which takes a while, involving loading the ISO file (which we provide) in to USB sticks and booting controllers from it (arrays running 6.0 and above No USB are needed). Also, the array re-setup needs to be done, configuring IP address, subnets, and interfaces etc. I would not suggest doing it, infact reimage is not really needed.

You may replace two drives at a time, issue disk --list from CLI, once the status of newly replaced disks changes to online, you may proceed with next set. (This is to prevent DSD service from being stopped, as multiple disks going offline would be considered as inconsistent RAID set)

Query: Replace all drives HF20 Storage Array

support_s — Mon, 21 Apr 2025 05:49:06 GMT

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Re: Query: Replace all drives HF20 Storage Array

WalterGatewood — Mon, 21 Apr 2025 13:13:04 GMT

Thank you for the reply. Is there any issues with replacing the existing drives with larger capacity drives? I've seen other information stating any drives being replaced would need to be identical to the ones being removed.

Re: Replace all drives HF20 Storage Array

WalterGatewood — Mon, 21 Apr 2025 13:16:16 GMT

I do see the links provided above but I'm having trouble getting them to open, I have a ticket in to gain access to them. So if the answer to my last question is answered in those documents please disregard that question. Thank you!