<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic Re: Install Nimble Storage in EMC Rack in Array Setup and Networking</title>
    <link>https://community.hpe.com/t5/array-setup-and-networking/install-nimble-storage-in-emc-rack/m-p/6983206#M688</link>
    <description>&lt;HTML&gt;&lt;HEAD&gt;&lt;/HEAD&gt;&lt;BODY&gt;&lt;P&gt;Roland - I have run into the problem on a few occasions. The easiest, quickest solution is to mount the array using a shelf that fits into the shorter rack space. In a few cases where the posts have 2 sets of mounting holes, as APC does, I've been able to fit the Nimble rail by removing the cover plate on one end of the rail that houses the tab/spring assembly. The allowed enough clearance to use the outside holes on one end and inside holes on the other.&lt;/P&gt;&lt;/BODY&gt;&lt;/HTML&gt;</description>
    <pubDate>Mon, 17 Nov 2014 17:51:20 GMT</pubDate>
    <dc:creator>mgoldstrom136</dc:creator>
    <dc:date>2014-11-17T17:51:20Z</dc:date>
    <item>
      <title>Install Nimble Storage in EMC Rack</title>
      <link>https://community.hpe.com/t5/array-setup-and-networking/install-nimble-storage-in-emc-rack/m-p/6983205#M687</link>
      <description>&lt;HTML&gt;&lt;HEAD&gt;&lt;/HEAD&gt;&lt;BODY&gt;&lt;P&gt;&lt;BR /&gt;Hi&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Has anybody installed a Nimble Storage in a EMC Rack. The original rack rails from Nimble Storage are too long for the EMC Rack 67.5 cm. The maximum length for the rails in the EMC Rack is 61cm. An APC Rack has a max lenght for rack rails about 72cm.&lt;/P&gt;&lt;P&gt;&lt;/P&gt;&lt;P&gt;Regards&lt;/P&gt;&lt;P&gt;Roland&lt;/P&gt;&lt;/BODY&gt;&lt;/HTML&gt;</description>
      <pubDate>Mon, 17 Nov 2014 14:52:02 GMT</pubDate>
      <guid>https://community.hpe.com/t5/array-setup-and-networking/install-nimble-storage-in-emc-rack/m-p/6983205#M687</guid>
      <dc:creator>Roland Kudelic</dc:creator>
      <dc:date>2014-11-17T14:52:02Z</dc:date>
    </item>
    <item>
      <title>Re: Install Nimble Storage in EMC Rack</title>
      <link>https://community.hpe.com/t5/array-setup-and-networking/install-nimble-storage-in-emc-rack/m-p/6983206#M688</link>
      <description>&lt;HTML&gt;&lt;HEAD&gt;&lt;/HEAD&gt;&lt;BODY&gt;&lt;P&gt;Roland - I have run into the problem on a few occasions. The easiest, quickest solution is to mount the array using a shelf that fits into the shorter rack space. In a few cases where the posts have 2 sets of mounting holes, as APC does, I've been able to fit the Nimble rail by removing the cover plate on one end of the rail that houses the tab/spring assembly. The allowed enough clearance to use the outside holes on one end and inside holes on the other.&lt;/P&gt;&lt;/BODY&gt;&lt;/HTML&gt;</description>
      <pubDate>Mon, 17 Nov 2014 17:51:20 GMT</pubDate>
      <guid>https://community.hpe.com/t5/array-setup-and-networking/install-nimble-storage-in-emc-rack/m-p/6983206#M688</guid>
      <dc:creator>mgoldstrom136</dc:creator>
      <dc:date>2014-11-17T17:51:20Z</dc:date>
    </item>
  </channel>
</rss>

