Nimble+KVM+New Linux Kernels

adamb86 — Thu, 03 Dec 2015 13:27:58 GMT

Hey everyone! New to nimble, we just got two CS300's a few months ago. We are looking to run them in a KVM environment (Proxmox 4 to be exact). The latest version of Proxmox is based on the 4.2.x kernel branch and we are running into all kinds of issues with installing VM's and filesystem errors within VM's. We are using simple LVM backed raw disks. Whats really interesting is the issue seems to only occur when using the default cache setting of "cache=none". This is the recommended/default cache settings and ensure writes are committed to the cache of the storage.

The issue does not happen in 2.6.32 kernels or 3.10.x kernels (Proxmox3) .

The Proxmox dev's have been digging into this now for a few weeks and havn't been able to pin the issue down. I am the only user reporting the issue and the issue only exists when using a disk backed by the nimble storage.

Just hoping there are some other community members using a newer kernel or looking to.

I appreciate the input!

Re: Nimble+KVM+New Linux Kernels

Finnzi — Mon, 12 Dec 2016 11:56:37 GMT

Hi,

Are you running iSCSI or FC?

I would start by checking your firmware versions vs. driver versions (NICs or HBAs). If there is a mismatch there you can hit all kinds of funny issues ;-)

Bgrds,

Finnzi

topic Re: Nimble+KVM+New Linux Kernels in Array Setup and Networking

Nimble+KVM+New Linux Kernels

Re: Nimble+KVM+New Linux Kernels