In Guest iSCSI setup on vSphere

boerlowie42 — Fri, 21 Nov 2014 08:24:09 GMT

Hi,

i'm about to set up networking for in guest SCSI (on Linux VMs) running on vSphere.

My idea is to give the VM 2 vNICs where one has a pNIC active on Fabric A (we're running on UCS) and the other on Fabric B. Now for a vmKernel setup, we need to set the 'not-active' adapter to Unused on the portgroup. But for an in-guest iSCSI setup, it's not really clear to me if this is also the case.for in Guest SCSI. I found some documentation for Equalogic devices where they set the not-active NIC to 'Standby'.

Does anybody have guidance on how to set this up on Nimble?

Thanks!

Re: In Guest iSCSI setup on vSphere

rfenton4 — Fri, 21 Nov 2014 09:45:32 GMT

Hi Sammy,

Take a look on InfoSight for KB-000157 - Configuring ESX for VM's with direct attached LUNs

This will walk you thru it - I'd post the KB here but for version control it will be better to reference the one on InfoSight - the reference above is a direct link

Let us know if you have any issues

Cheers

Rich

topic Re: In Guest iSCSI setup on vSphere in Array Setup and Networking

In Guest iSCSI setup on vSphere

Re: In Guest iSCSI setup on vSphere