MSA2040 replace larger disk ...

wowhsieh — Tue, 12 Jun 2018 10:29:44 GMT

There're two DL380 G9 using FC link to MSA2040, MSA2040 hard disk 2TB x10, and is going to change to 4TB x12, how to replace the disks (procedule)? one-by-one? will it affect the vm?

Re: MSA2040 replace larger disk ...

SUBHAJIT KHANBARMAN_1 — Tue, 12 Jun 2018 18:06:02 GMT

You haven't mentioned if this is Virtual array or Linear array. I am assuming this is Linear array.

If you have ESX VM then you can migrate your VMs to some other Storage with the help of Vmotion feature of ESX. Then delete the vdisk and volumes to existing drives and replace them with new drives. Then recreate vdisk and volumes. Then migrate back your VMs from other Storage to MSA again

Other option I could think of take data backup, delete existing vdisk/volumes of the MSA. Then replace with 4TB drives and then create new vdisk/volumes. Then restaore data from backup

Another option could be very much time consuming. You can replace one 2TB drive with one 4TB drive and wait for reconstruction to get completed. Then go for next drive replacement. I am assuming they are in RAID 5 or RAID 6. Once all 10 drives replaced with all 4TB drives then you need to take data backup and then go for vdisk expansion with 2 drives.

Hope this helps!
Regards
Subhajit

If you feel this was helpful please click the KUDOS! thumb below!

***********************************************************************************

topic MSA2040 replace larger disk ... in MSA Storage

MSA2040 replace larger disk ...

Re: MSA2040 replace larger disk ...