https://community.hpe.com/t5/msa-storage/procedure-after-replace-disk/m-p/532193#M1345 Is there something I need to do after replacing a physical disk failure?<BR /> <BR /> I've replaced Bay 2 with 3 new disks, and the fail light keeps reapaearing shortly after insertion.<BR /> <BR /> Have run "accept units" on the CLI sucessfully, but no change. Trying to determine if the MSA has a problem or it's a me procedural thing. Thu, 19 May 2005 23:44:34 GMT CA1159762 2005-05-19T23:44:34Z https://community.hpe.com/t5/msa-storage/procedure-after-replace-disk/m-p/532193#M1345 Is there something I need to do after replacing a physical disk failure?<BR /> <BR /> I've replaced Bay 2 with 3 new disks, and the fail light keeps reapaearing shortly after insertion.<BR /> <BR /> Have run "accept units" on the CLI sucessfully, but no change. Trying to determine if the MSA has a problem or it's a me procedural thing. Thu, 19 May 2005 23:44:34 GMT https://community.hpe.com/t5/msa-storage/procedure-after-replace-disk/m-p/532193#M1345 CA1159762 2005-05-19T23:44:34Z