topic Re: iscsi boot in MSA Storage

iscsi boot

purushothama — Tue, 14 Jun 2005 17:47:52 GMT

Hi I have HP NC370T multifunction adapter which need to be configured to boot Windows from iscsi disk created on NetApp filer.
broadcom says they support iscsi boot. Please, Anyone can guide me about this? My configuration is simple, NC370T is connected to netapp filer and a LUN is created in netapp filer. Now I need instructions to configure iscsi boot on setup.

Thanks much,
Reddy

Re: iscsi boot

Frank Mantong — Mon, 01 Aug 2005 14:13:49 GMT

Reddy,
Have you figured out how to do iSCSI boot, yet? I want to do the same thing but couldn't find anything on this or don't know how to get support from HP. Like you, I have no problem accessing to my iSCSI drive (Nishan) in W2k but don't know how to boot from it. Appreciate if you find anything on this.
Thanks,
Frank

Re: iscsi boot

vasu1124 — Sat, 23 Aug 2008 12:43:05 GMT

Try http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=MTX-028ce39726d74abfbb046f153f&jumpid=reg_R1002_USEN).

I was not very lucky with it yet.