topic Qlogic FCA2214 & Windows 2003 in MSA Storage

Qlogic FCA2214 & Windows 2003

Sandeep Sanjao Figer — Tue, 05 Jul 2005 08:49:27 GMT

Hi,

I am trying to connect two Windows 2003 Enterprise servers to my HP EVA 5000 SAN. The drivers seem to load automatic in Windows 2003. However how do I find my WWN numbers for these cards in Windows 2003? On my other server I have FCA 2201 cards which work with Lputilnt.exe utility which helps locate WWN numbers & upgrade firmware & so on.
Please help

Regards,
Sandeep

Re: Qlogic FCA2214 & Windows 2003

BR824100 — Tue, 05 Jul 2005 09:39:05 GMT

I believe you can only check it from the QLogic BIOS when the machine boots up?

The other way would be to telnet onto the switch (i'm assuming brocade switches here) and run the switchshow to show all the ports on the switch.

Regards

Dan

Re: Qlogic FCA2214 & Windows 2003

Sandeep Sanjao Figer — Tue, 05 Jul 2005 10:24:12 GMT

Hi,

Is there any utility which could display the wwn number in Windows? Also, any procedure to upgrade Qlogic HBA firmware?
Normally BIOS option is disbled for these adapters. It could be ridiculous to boot the server to find wwn number.

Regards,
Sandeep

Re: Qlogic FCA2214 & Windows 2003

CA1298860 — Wed, 06 Jul 2005 01:56:50 GMT

Try SAN Serfer. It can be downloaded from hp.com

Re: Qlogic FCA2214 & Windows 2003

kris rombauts — Wed, 06 Jul 2005 01:57:21 GMT

Hi Sandeep,

just download the utility for the Qlogic adapters from here :

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=315741&locale=en_US&taskId=135&prodTypeId=12169&prodSeriesId=315739&swEnvOID=1005

It's called sansurfer and is like lputil for Emulex cards but then for these Qlogic cards and allows WWN retrieval and firmware upgrade and config etc etc.

HTH

Kris

Re: Qlogic FCA2214 & Windows 2003

Sandeep Sanjao Figer — Wed, 06 Jul 2005 01:59:26 GMT

Hi,

I downloaded the Sansurfer utility this morning & that got me going. Thanks for the help anyway.

Re: Qlogic FCA2214 & Windows 2003

CA1346525 — Thu, 10 Nov 2005 17:10:44 GMT

Check out this HP link that states FCA 2214 is supported by Linux only and the FCA 2201 is supported by Windows environments.

Re: Qlogic FCA2214 & Windows 2003

CA1346525 — Thu, 10 Nov 2005 17:13:44 GMT

Sorry, here's the link...

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00028821

Re: Qlogic FCA2214 & Windows 2003

Uwe Zessin — Fri, 11 Nov 2005 01:17:40 GMT

That information is not true since a long time - today, the FCA2214 is supported by Linux, NetWare and Windows.