MSA2050: Make Spare Disk

praveensmile — Thu, 17 Sep 2020 14:29:59 GMT

I purshased two Hard disk for MSA 2050.

I want to make one Hard Disk to expand the existing Array and the Second one to Make as a Spare Disk for the Array.

How it possible,as i heard MSA 2050 is not linear,its a Virtual array concept

P.S > ADMIN > Post moved as a new topic from

Re: MSA2050: Make Spare Disk

SUBHAJIT KHANBARMAN_1 — Thu, 17 Sep 2020 16:47:29 GMT

Yes in MSA 2050 you can't expand existing Virtual Disk Group (VDG). Here concept is to increase size of the Pool. So you need more and more VDG to the pool. So if you want to add any new drive, only option is to create new VDG with that drive but in practical that's not meaningful. It's always best practice to check existing VDG for the particular drive type and according to that try to match same number of drives and RAID type to create new VDG and add to the same Pool to increase the size of the Pool. This is important to maintain the performance.

Coming to spare concept, yes you can configure Global spare with the single drive.

To add global spares
1. In the Pools topic, select Action > Manage Spares. The Manage Spares panel displays.
2. In the Add New Spares section, click on available disks to select them.
3. Click Add Spares. The system updates the global spares and a confirmation panel displays.
4. To close the confirmation panel, click OK.

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

*************************************************************************

Re: MSA2050: Make Spare Disk

praveensmile — Fri, 18 Sep 2020 15:50:09 GMT

Thanks a lot..

topic MSA2050: Make Spare Disk in MSA Storage

MSA2050: Make Spare Disk

Re: MSA2050: Make Spare Disk

Re: MSA2050: Make Spare Disk