topic Re: MSA 2050 firmware upgrade path in MSA Storage

MSA 2050 firmware upgrade path

ArturoPerez — Wed, 14 Apr 2021 18:22:22 GMT

I would like suggestions about what is the best path to upgrade the controlller firmware of a MSA 2050.

Actual version of Controllers: VL100P001
Desired version at the end of the upgrade: VL270P005

Additionally, How can I identify the what is a major or minor version in order to follow the instructions of the website HPE MSA Storage Firmware & Release Notes?

Thank you,

Arturo Perez

Re: MSA 2050 firmware upgrade path

Shawn_K — Wed, 14 Apr 2021 20:50:01 GMT

Hello Arturo,

For the MSA, the major versions are the first part of the version string. For example, VL100 and VL270 are the major version releases for the MSA 2050. The last half of the string refers to the minor versions. Also, the "R" refers to release and the "P" refers to a patch. So for the MSA 2050 VL100R004 was the first major release version. HPE patched that version with VL100P001.

For your system, which is running VL100P001, you can go directly to VL270P005. You do not require to install a version inbetween.

I would suggest you check the overall health of your system prior to doing a firmware upgrade. Additionally you should plan to install any additional enclosure or drive firmware upgrades as well. To check the overall health of your system and any available firmware versions you can use our new MSA Health Check Tool at the following link: www.hpe.com/storage/MSAHealthCheck

Download your MSA Log File from your MSA array
Upload the MSA Log File into the MSA Health Check website
Review the results by clicking through the tabs and saving the PDF report
Links to array, enclosure, and drive firmware are provided for easy access

I work for Hewlett Packard Enterprise. The comments in this post are my own and do not represent an official reply from HPE. No warranty or guarantees of any kind are expressed in my reply.

Cheers,
Shawn

Re: MSA 2050 firmware upgrade path

Lawrance Lee_1 — Thu, 24 Nov 2022 00:37:04 GMT

According to the MSA website, https://h41111.www4.hpe.com/storage/msafirmware.html

it says the following:

If upgrading from a version of firmware that is more than two major firmware versions back, it will require a multiple step process to get to the latest firmware version. Firmware should only be upgraded from the last two major firmware releases. If multiple upgrade steps are required, it is recommended to engage HPE Support to confirm the upgrade path.