topic Query: Help with setting up iSCSI target with multiple IPs in MSA Storage

Help with setting up iSCSI target with multiple IPs

ITxD — Mon, 19 Aug 2024 14:41:33 GMT

Hi,

We have installed a new storage HPE MSA 2060. the storage server has two controllers A&B and each controller has 4 nics(8 nics in total). and each NIC is configured with an IP. so the two controllers have 8 IPs in total.
We're are trying to connect a proxmox cluster to the storage. but not sure which IP of the storage's 8 IPs should we use.

We can't use just one IP becasue we need to have redundancy.

diagram detailing the setup: https://imgur.com/a/FannAia

Let me know if you have any questions.

Query: Help with setting up iSCSI target with multiple IPs

support_s — Mon, 19 Aug 2024 05:16:47 GMT

System recommended content:

1. HPE MSA 1060/2060/2062 Storage Management Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Moderator edit: Removed the broken link.]

Re: Query: Help with setting up iSCSI target with multiple IPs

Cali — Mon, 19 Aug 2024 12:44:28 GMT

Same Post at same Time and already answered here: Help with setting up iSCSI target with multiple IPs on Proxmox | Proxmox Support Forum

Cali

Query: Help with setting up iSCSI target with multiple IPs

support_s — Wed, 21 Aug 2024 09:29:43 GMT

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.