https://community.hpe.com/t5/msa-storage/sam/m-p/93453#M19 Hi, <BR /> Every one,<BR /> <BR /> I`m get a problem after configure the LUN with the CVSM for the VA7100, <BR /> <BR /> Sam can`t see the lun made with this Manager for the VA7100.<BR /> <BR /> Some one known about that, o maybe the system need some Patch`s for sam.<BR /> <BR /> Thank you!<BR /> <BR /> <BR /> Tue, 21 May 2002 20:59:54 GMT CA439625 2002-05-21T20:59:54Z https://community.hpe.com/t5/msa-storage/sam/m-p/93453#M19 Hi, <BR /> Every one,<BR /> <BR /> I`m get a problem after configure the LUN with the CVSM for the VA7100, <BR /> <BR /> Sam can`t see the lun made with this Manager for the VA7100.<BR /> <BR /> Some one known about that, o maybe the system need some Patch`s for sam.<BR /> <BR /> Thank you!<BR /> <BR /> <BR /> Tue, 21 May 2002 20:59:54 GMT https://community.hpe.com/t5/msa-storage/sam/m-p/93453#M19 CA439625 2002-05-21T20:59:54Z https://community.hpe.com/t5/msa-storage/sam/m-p/93454#M20 We have seen the same issue in the case of an HP-UX 10.20 server connected to both 12H and VA7100 arrays. The server was inititially unable to see LUNs created on a VA7100 with firmware HP15. It was able to see the LUNs with CommandView and ioscan after applying patch PHKL_23259, but then SAM took up to 20 mins to complete a scan and still failed to see all LUNs. We are still searching for a solution to this SAM issue. Tue, 28 May 2002 17:19:00 GMT https://community.hpe.com/t5/msa-storage/sam/m-p/93454#M20 CA46372 2002-05-28T17:19:00Z