topic Re: msa1000 setup in MSA Storage

msa1000 setup

ian shanks — Mon, 13 Mar 2006 16:45:11 GMT

I have setup my msa1000. From the one server that has the hba installed i can see the controller and have configured two logical drives from the array.
How do i see the volumes from the server that it is attached to.
When i try to run san surfer express it says that the san is not attached, but i have configured it using the acu

any ideas ?

Re: msa1000 setup

BR894765 — Mon, 13 Mar 2006 17:03:13 GMT

What HBA do you use?
SANSurfer express is only for QLogic-based HBAs (such as FCA2214).

Re: msa1000 setup

Javier Perez Losada — Mon, 13 Mar 2006 17:05:48 GMT

Disk Adminisrator, initilize and Create Primary or extended partition, Format and use.

JPL

Re: msa1000 setup

ian shanks — Mon, 13 Mar 2006 17:43:30 GMT

I am using the q200 hba which come in the starter kit.

when i open disk administrator the san drive is not there , although i can see the logical drives within the acu.