Boot problem on a Brocade Core switch 2/64

CA1025692 — Mon, 29 Sep 2003 17:07:31 GMT

After reconfiguring the network te switch autoreboots after each boot.
I attach the output.
How can I reload the system default values ??
How can I debug the problem ??
Is ther any boot variable that may help ?? This is what I can get pressing Escape during the boot.

The output in the console is like this:

The system is coming up, please wait...
Checking system RAM - press any key to stop test

Checking memory address: 02900000
System RAM check terminated by keyboard
System RAM check colete
Press escape within 4 seconds to enter boot interface.
Booting "IDE w/ XFS" image.
Entry point at 0x00800000 ...

Linux/PPC load:
BootROM command line: quiet
Uncompressing Linux...done.
Now booting the kernel
cardmgr: starting, version is 3.1.29
cardmgr: watching 2 sockets
cardmgr: socket 0: ATA/IDE Fixed Disk
cardmgr: executing: 'modprobe ide_cs'
cardmgr: executing: './ide start hda'
cardmgr: exiting
Attempting to find a root file system on hda1...
INIT: version 2.78 booting
(none)
INIT: Entering runlevel: 3
SIOCADDRT: No such device
(none): Host name lookup failure
(none): Host name lookup failure
SIOCADDRT: No such device
pdcheck: info: found new pd in MTD: mtd_ts=1064221270 WDTD Mon Sep 22 09:01:10 2
003, cf_ts=1064218080
pdcheck: WARNING: panicdump: number of files maxed out
Platform System Module (rev. 1) is loaded.

before arwr=0x30,rd=0xa,sts=0x1
after arb (2): wr=0x30,rd=0xa,sts=0x1 (standby)

PCI: Enabling device 00:01.0 (0000 -> 0003)
PCI: Enabling device 00:02.0 (0000 -> 0003)

Proxy: ip2ipc started (run=1, rc=0), debug=0
Proxy: ipc2ip started (rc=0)

Fabric OS ((none))

(none) console login: SIOCADDRT: Invalid argument
Switch instance 0 Created with domain ID 6.
Fibre Channel driver instance 0 created.

Switch instance 1 Created with domain ID 7.
Fibre Channel driver instance 1 created.

Fabric OS ((none))

(none) console login: admin
SNMP Research SNMP Agent Resident Module Version 15.3.1.4
Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
, 2001 SNMP Research, Inc.
Enter Switch Number to Login <0 or 1>: 0
Password: SNMP Research SNMP Agent Resident Module Version 15.3.1.4
Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
, 2001 SNMP Research, Inc.

*****************************************************************
Logging into STANDBY CP, not all commands are fully supported !!
*****************************************************************

0x40a (fabos): Switch: 0, Info HAMKERNEL-HTBT_DOWN, 4, Heartbeat down
0x232 (fabos): Switch: 0, Info FSSME-PEER_SVC_NOT_IN_OPR, 4, Peer Service not
in operation: chassis:0

0x232 (fabos): Switch: 0, Info FSSME-PEER_SVC_NOT_IN_OPR, 4, Peer Service not
in operation: fcsw:1

ip.c:226:Invalid gateway IP address 0.0.0.0
0x232 (fabos): Switch: 0, Info FSSME-PEER_SVC_NOT_IN_OPR, 4, Peer Service not
in operation: fcsw:0

Broadcast message from root Mon Sep 22 09:02:48 2003...

********************************************************************
Warning: Control Processor (CP) has changed state to Active.
All Active commands are available now.
********************************************************************

sysctrld: all se 0x227 (fabos): Switch: 0, Warning rvices Standby
HAMKERNEL-WARNING, 3, HAM ham.c:437

MADPASSW06:admin>
MADPASSW06:admin>
MADPASSW06:admin>
MADPASSW06:admin> logout

Fabric OS ((none))

(none) console login: 0x2dc (fabos): Switch: 1, Info ZONE-DB_RESTORE_TIME, 4,
Zone-DB size (0) bytes. Wallclock Restore time (0) milli-sec .

0x28a (fabos): Switch: 0, Info ZONE-DB_RESTORE_TIME, 4, Zone-DB size (0) bytes
. Wallclock Restore time (1) milli-sec .

kSWD:Detected unexpected termination of: ''snmpd:1'RfP=859,RgP=859,DfP=0,die
d=1,rt=58332,dt=48986,to=50000,aJc=6832,aJp=0,ac=-952047000,abiJp=0,aSeq=1,kSeq=
0,kJc=0,kJp=0,J=9346,rs=2'

0x35b (fabos): Switch: 0, Critical kSWD-kSWD_GENERIC_ERR_CRITICAL, 1, kSWD: De
tected unexpected termination of: ''snmpd:1'RfP=859,RgP=859,DfP=0,died=1,rt=
58332,dt=48986,to=50000,aJc=6832,aJp=0,abiJc=-952047000,abiJp=0,aSeq=1,kS
pid: 859, process: snmpd
flags: 324, pending sigs: 0
exit_code: 0, exit_sig: 17
parent_sig: 0
kSWD: Prepare to reboot/failover in a moment...
kSWD: will reboot/failover in 55 seconds
kSWD:Detected unexpected termination of: ''snmpd:1'RfP=859,RgP=859,DfP=0,die
d=1,rt=58332,dt=48915,to=50000,aJc=6832,aJp=0,abiJc=-952047000,abiJp=0,aSeq=1,kS
eq=0,kJc=0,kJp=0,J=9417,rs=2'

pid: 859, process: snmpd
flags: 324, pending sigs: 0
exit_code: 256, exit_sig: 17
parent_sig: 0
kSWD: Prepare to reboot/failover in a moment...
0x232 (fabos): Switch: 0, Critical FSSME-LOCAL_COMP_NOT_IN_OPR, 1, Local compo
nent not in operation: snmp fcsw:1

0x227 (fabos): Switch: 1, Critical SYSC-ERROR, 1, sysc_svc.c:2640:fcsw{1}:SI_S
T_ACTIVATING

uSWD: Received Data Collection Notification ==== 0x28a (fabos): Switch: 0, Info
=======
ZONE-DB_RESTORE_TIME, 4, Zone-DB size (0) bytes. Wallclock Restore time (0) mill
i-sec .

0x227 (fabos): Switch: 0, Info HAMKERNEL-ERROR_NOTIFICATION, 4, Error notifica
tion received: sysctrld

Re: Boot problem on a Brocade Core switch 2/64

Eugeny Brychkov — Tue, 30 Sep 2003 09:16:48 GMT

After reconfiguring what - SAN (network) or the switch? Did you reconfigure switch?

pdcheck: WARNING: panicdump: number of files maxed out

Eugeny

Re: Boot problem on a Brocade Core switch 2/64

CA1025692 — Tue, 30 Sep 2003 10:29:27 GMT

We only changed the network config with ipaddrset: IP & Gtwy (LAN) and then got the problem. When you execute this command, you are prompted to choose the CPs (processors) or the Switches (logical switch 0 or 1). We changed both.

I think that te problem arise when the SNMP deamon fails.

Thanks in advance
antonio

Re: Boot problem on a Brocade Core switch 2/64

Eugeny Brychkov — Tue, 30 Sep 2003 16:14:41 GMT

I would call HP for help. This switch works on some kind of unix and maybe expert help on its configuration is required to help you
Eugeny

Re: Boot problem on a Brocade Core switch 2/64

Eugeny Brychkov — Tue, 30 Sep 2003 16:16:01 GMT

Ah yes... it works on Linux "Uncompressing Linux..."!
Eugeny

Re: Boot problem on a Brocade Core switch 2/64

CA983621 — Mon, 10 Nov 2003 08:16:00 GMT

Login as root to the 2/64 and run df and check to see if what your filesystems capcaities are there should be 2 filesystems
/ &
/mnt

One is active filesystem other is root. if / is full that could be your problem. This has been known to be caused by management software SanPoint Control so on

topic Re: Boot problem on a Brocade Core switch 2/64 in MSA Storage

Boot problem on a Brocade Core switch 2/64

Re: Boot problem on a Brocade Core switch 2/64

Re: Boot problem on a Brocade Core switch 2/64

Re: Boot problem on a Brocade Core switch 2/64

Re: Boot problem on a Brocade Core switch 2/64

Re: Boot problem on a Brocade Core switch 2/64