https://community.hpe.com/t5/msa-storage/msa1000-bootable-cd-fails/m-p/712142#M2672 I am trying to use the bootable CD that comes with the MSA1000 on a DL580 G4. The version of the CD is 5.55. Linux loads from the CD but X-Windows/ACU does not start and I am instead given a bash prompt.<BR /> From the prompt if I try to start X-Windows it fails with the following messages:<BR /> (WW) ATI: PCI/AGP Mach64 in slot 1:3:0 could not be detected!<BR /> (EE) No devices detected. Fatal Server Error: no screens found.<BR /> <BR /> I have noticed that the DL580 G4 comes with a ATI ES1000 video controller and not a Mach64.<BR /> <BR /> At a guess I would say that the bootable CD hasn't got the drivers for the latest video card.<BR /> <BR /> I have tried V6.51 and V7.18 of the CD and these also fail but dont give a command line, they just reboot the server.<BR /> <BR /> Any ideas anyone? Fri, 27 Oct 2006 10:12:56 GMT Colin Hendrie 2006-10-27T10:12:56Z https://community.hpe.com/t5/msa-storage/msa1000-bootable-cd-fails/m-p/712142#M2672 I am trying to use the bootable CD that comes with the MSA1000 on a DL580 G4. The version of the CD is 5.55. Linux loads from the CD but X-Windows/ACU does not start and I am instead given a bash prompt.<BR /> From the prompt if I try to start X-Windows it fails with the following messages:<BR /> (WW) ATI: PCI/AGP Mach64 in slot 1:3:0 could not be detected!<BR /> (EE) No devices detected. Fatal Server Error: no screens found.<BR /> <BR /> I have noticed that the DL580 G4 comes with a ATI ES1000 video controller and not a Mach64.<BR /> <BR /> At a guess I would say that the bootable CD hasn't got the drivers for the latest video card.<BR /> <BR /> I have tried V6.51 and V7.18 of the CD and these also fail but dont give a command line, they just reboot the server.<BR /> <BR /> Any ideas anyone? Fri, 27 Oct 2006 10:12:56 GMT https://community.hpe.com/t5/msa-storage/msa1000-bootable-cd-fails/m-p/712142#M2672 Colin Hendrie 2006-10-27T10:12:56Z