https://community.hpe.com/t5/hpe-msa-storage/msl4048-discovery/m-p/760209#M2942 Hi All.<BR /> <BR /> I am new to the SAN.<BR /> I am trying to connect MSL4048FC library to MSA1500 active/active controller. But server (DL380 G3/Windows 2000 Server) does not detect any new equipment. What settings should I check?<BR /> Thanks in advance. Tue, 06 Mar 2007 01:50:35 GMT Yuriy Bilan 2007-03-06T01:50:35Z https://community.hpe.com/t5/hpe-msa-storage/msl4048-discovery/m-p/760209#M2942 Hi All.<BR /> <BR /> I am new to the SAN.<BR /> I am trying to connect MSL4048FC library to MSA1500 active/active controller. But server (DL380 G3/Windows 2000 Server) does not detect any new equipment. What settings should I check?<BR /> Thanks in advance. Tue, 06 Mar 2007 01:50:35 GMT https://community.hpe.com/t5/hpe-msa-storage/msl4048-discovery/m-p/760209#M2942 Yuriy Bilan 2007-03-06T01:50:35Z https://community.hpe.com/t5/hpe-msa-storage/msl4048-discovery/m-p/760210#M2943 You need to check the zoning in the switch.<BR />you can check in the switch logs if the unit is logged in<BR /><BR />Also the settings in the msl are those related to the FC connectivity, be sure to set them accordly witht the FC port of the switch ( N mode and the correct speed), this setting should be made for each drive, and on the FC port1, the FC port two usualy is not used and should be set in autodetect mode for Fibre Speed and Port Type Wed, 07 Mar 2007 03:26:19 GMT https://community.hpe.com/t5/hpe-msa-storage/msl4048-discovery/m-p/760210#M2943 meloni 2007-03-07T03:26:19Z