https://community.hpe.com/t5/msa-storage/storageworks-edge-switch-question/m-p/763014#M2965 I am preparing to purchase a 2/12 Edgeswitch as a redundant to my 24 port. I see that "flexport technology" means the unit has only 4 ports enabled. I also see a feature called full-fabric capability, which would enable the the G_Port technology, as I use in my current switch. I did not configure the current switch and am left wondering if I need G_Ports or can I use the default F_Ports. Can someone assist? Thx Mon, 12 Mar 2007 13:32:54 GMT don thompson_3 2007-03-12T13:32:54Z https://community.hpe.com/t5/msa-storage/storageworks-edge-switch-question/m-p/763014#M2965 I am preparing to purchase a 2/12 Edgeswitch as a redundant to my 24 port. I see that "flexport technology" means the unit has only 4 ports enabled. I also see a feature called full-fabric capability, which would enable the the G_Port technology, as I use in my current switch. I did not configure the current switch and am left wondering if I need G_Ports or can I use the default F_Ports. Can someone assist? Thx Mon, 12 Mar 2007 13:32:54 GMT https://community.hpe.com/t5/msa-storage/storageworks-edge-switch-question/m-p/763014#M2965 don thompson_3 2007-03-12T13:32:54Z