https://community.hpe.com/t5/msa-storage/msa1000-configuration-mirroring/m-p/810082#M3260 I may be in a little over my head here, so I hope you can help. I have setup MSA1000's in the past but on very simple configurations. Here is my scenario. I have 2 MSA1000's a single 16 port SAN switch. I am trying to figure out if I can have the 2 MSA1000's mirror each other. I found that I can create an array on each of the MSA1000's and use Windows mirroring, but then I take a performance hit. Is there anyway to do this at a hardware level. Thanks for you help. Thu, 28 Jun 2007 12:42:10 GMT Adam Wittke 2007-06-28T12:42:10Z https://community.hpe.com/t5/msa-storage/msa1000-configuration-mirroring/m-p/810082#M3260 I may be in a little over my head here, so I hope you can help. I have setup MSA1000's in the past but on very simple configurations. Here is my scenario. I have 2 MSA1000's a single 16 port SAN switch. I am trying to figure out if I can have the 2 MSA1000's mirror each other. I found that I can create an array on each of the MSA1000's and use Windows mirroring, but then I take a performance hit. Is there anyway to do this at a hardware level. Thanks for you help. Thu, 28 Jun 2007 12:42:10 GMT https://community.hpe.com/t5/msa-storage/msa1000-configuration-mirroring/m-p/810082#M3260 Adam Wittke 2007-06-28T12:42:10Z