https://community.hpe.com/t5/msa-storage/command-view-7-0-does-not-discover-the-eva/m-p/828654#M3369 I am doing a new installation on an appliance dl360 management to turn it into a dedicated server with Windows 2003. For this operation I have guarded 2 disks of the appliance of backup.In few days I am going to install one new Eva8100,BC,CA and I plan to install command view 7.0<BR /> The problem is that I install perfectly but command view v7 does not do discover of the Evas, I have tried with the driver for default and with Storport driver in the HBAs, but it( is not capable of seeing the EVA5000.<BR /> It is not a problem of zones in the switches.<BR /> When I return to put the discs with the version of the Appliance command view it works perfectly with the Eva 5000.<BR /> Someone has had this experience or can help me?<BR /> Thu, 16 Aug 2007 05:09:14 GMT BR827022 2007-08-16T05:09:14Z https://community.hpe.com/t5/msa-storage/command-view-7-0-does-not-discover-the-eva/m-p/828654#M3369 I am doing a new installation on an appliance dl360 management to turn it into a dedicated server with Windows 2003. For this operation I have guarded 2 disks of the appliance of backup.In few days I am going to install one new Eva8100,BC,CA and I plan to install command view 7.0<BR /> The problem is that I install perfectly but command view v7 does not do discover of the Evas, I have tried with the driver for default and with Storport driver in the HBAs, but it( is not capable of seeing the EVA5000.<BR /> It is not a problem of zones in the switches.<BR /> When I return to put the discs with the version of the Appliance command view it works perfectly with the Eva 5000.<BR /> Someone has had this experience or can help me?<BR /> Thu, 16 Aug 2007 05:09:14 GMT https://community.hpe.com/t5/msa-storage/command-view-7-0-does-not-discover-the-eva/m-p/828654#M3369 BR827022 2007-08-16T05:09:14Z https://community.hpe.com/t5/msa-storage/command-view-7-0-does-not-discover-the-eva/m-p/828655#M3370 The Instant-on licensing for CV-7.0 should permit you to operate for 180 days.<BR /><BR />visit <A href="http://webware.hp.com" target="_blank" rel="nofollow">http://webware.hp.com</A> for the license key<BR /><BR />Have you configured a new OCP password for the array and registered it with the new version of CommandView? The OCP password on the array must match the password enabled in CommandView. <BR /><BR />See the HP StorageWorks Command View EVA User Guide at <A href="http://www.hp.com/support/manuals" target="_blank" rel="nofollow">http://www.hp.com/support/manuals</A><BR /><BR /> Fri, 24 Aug 2007 07:55:59 GMT https://community.hpe.com/t5/msa-storage/command-view-7-0-does-not-discover-the-eva/m-p/828655#M3370 JR-Pounds 2007-08-24T07:55:59Z