https://community.hpe.com/t5/msa-storage/msa-1000-how-to-configure-ip/m-p/833464#M3390 I have a HP SAN MSA 1000 already configured and running but the person that set this up neglected to supply the IP address of the unit. How can I check what the IP is and also how do i connect into the SAN to find out the array configuration. We have an ESX3.0 server with a windows environment attached via VMWARE. Mon, 27 Aug 2007 20:00:04 GMT Bruce.Provan 2007-08-27T20:00:04Z https://community.hpe.com/t5/msa-storage/msa-1000-how-to-configure-ip/m-p/833464#M3390 I have a HP SAN MSA 1000 already configured and running but the person that set this up neglected to supply the IP address of the unit. How can I check what the IP is and also how do i connect into the SAN to find out the array configuration. We have an ESX3.0 server with a windows environment attached via VMWARE. Mon, 27 Aug 2007 20:00:04 GMT https://community.hpe.com/t5/msa-storage/msa-1000-how-to-configure-ip/m-p/833464#M3390 Bruce.Provan 2007-08-27T20:00:04Z https://community.hpe.com/t5/msa-storage/msa-1000-how-to-configure-ip/m-p/833465#M3391 The MSA1000 does not have IP-connectivity.<BR />You need Array Configuration Utility to see/change the configuration, but I am not sure if ACU exists for Vmware ESX server. Accodring to vmware's SAN guide, you need to use the serial cable connection the MSA1000 controllers.<BR /><A href="http://www.vmware.com/pdf/vi3_esx_san_cfg.pdf" target="_blank" rel="nofollow">http://www.vmware.com/pdf/vi3_esx_san_cfg.pdf</A><BR /><BR />Regards,<BR />Stephen Tue, 28 Aug 2007 06:14:41 GMT https://community.hpe.com/t5/msa-storage/msa-1000-how-to-configure-ip/m-p/833465#M3391 Stephen Kebbell 2007-08-28T06:14:41Z