https://community.hpe.com/t5/msa-storage/msa1000-issues-with-firmware/m-p/833905#M3397 I have an MSA1000 that I purchased a second controller for. When I installed the card the system asked me to sync the version information. This has synced with the new card and now when my system is up I get an error. "FW not supported" How can I resolve this issue. Tue, 28 Aug 2007 15:21:41 GMT atrafny 2007-08-28T15:21:41Z https://community.hpe.com/t5/msa-storage/msa1000-issues-with-firmware/m-p/833905#M3397 I have an MSA1000 that I purchased a second controller for. When I installed the card the system asked me to sync the version information. This has synced with the new card and now when my system is up I get an error. "FW not supported" How can I resolve this issue. Tue, 28 Aug 2007 15:21:41 GMT https://community.hpe.com/t5/msa-storage/msa1000-issues-with-firmware/m-p/833905#M3397 atrafny 2007-08-28T15:21:41Z https://community.hpe.com/t5/msa-storage/msa1000-issues-with-firmware/m-p/833906#M3398 What was the firmware version before you adde the second controller? <BR />-- You will need to compare the following details from all your connected hosts:<BR />OS type and version<BR />Multipath software &amp; version<BR />HBA model &amp; driver <BR />...with the information in the Firmware readme files. <BR /><BR />-- If you know that, then go to the HP site:<BR /><A href="http://h18006.www1.hp.com/storage/disk_storage/msa_diskarrays/san_arrays/msa1000/index.html" target="_blank" rel="nofollow">http://h18006.www1.hp.com/storage/disk_storage/msa_diskarrays/san_arrays/msa1000/index.html</A><BR />...and download that firmware version, and install it.<BR />If you were previously running an older version than in now on the HP website, you may be out of luck. <BR /> Wed, 29 Aug 2007 09:27:51 GMT https://community.hpe.com/t5/msa-storage/msa1000-issues-with-firmware/m-p/833906#M3398 James Muell 2007-08-29T09:27:51Z