topic Re: HP StorageWorks 4/8 Base Switch in MSA Storage

HP StorageWorks 4/8 Base Switch

david way — Wed, 17 Sep 2008 18:14:47 GMT

This is a brocade switch but looking on Brocade's web site I am unable to locate the MIB definition file that supports this device.

Can someone send me a link to that MIB definition file.

Believe it is: brocade RFC1213 mib

Re: HP StorageWorks 4/8 Base Switch

david way — Wed, 17 Sep 2008 18:23:21 GMT

I have sent my customer the v 5.3 MIB from HP but they said it does not parse correctly. That was about 4 months ago and now they are saying it does not work. So sent them, what is likely the same file as I downloaded just now again. But really hoping for a link from Brocade

Re: HP StorageWorks 4/8 Base Switch

Steven Clementi — Fri, 19 Sep 2008 05:19:33 GMT

David:

What firmware version is the switch running?

Steven

Re: HP StorageWorks 4/8 Base Switch

david way — Mon, 22 Sep 2008 12:53:51 GMT

The device was shipped to the customer in July 2007. It is now being installed, so unfortunatey I do not know but not sure that should matter too much for the MIB definition file unless the brocade itself can produce the file.

Re: HP StorageWorks 4/8 Base Switch

Tim Matthews_2 — Mon, 22 Sep 2008 13:21:49 GMT

David,
This link references all the Fabrics available:
http://www.brocade.com/education_services/docs/bcsm/53-1000439-01_MIB_v5.3.pdf
You will need to cross reference this with the FOS you are running.
Under the lid the switch is identical to the Silkworm 200e range, there is a link here but cannot recommend live usage of content.
http://www.oidview.com/mibs/1588/md-1588-1.html

Tim

Re: HP StorageWorks 4/8 Base Switch

david way — Mon, 22 Sep 2008 14:22:47 GMT

I have the education document as well but what I need is the actual MIB file.

I am guessing I require a support contract to get it but was hoping they would freely share that file. And really was just me who could not find it ...