https://community.hpe.com/t5/msa-storage/msa-2012i-mapping/m-p/1082128#M4838 No, this is not a file share - you have to enter the IP address to the iSCSI initiator and perform a target discovery.<BR />How to do that? Well that depends on the operating system, which you kept as a secret ;-) Thu, 14 May 2009 12:04:36 GMT Uwe Zessin 2009-05-14T12:04:36Z https://community.hpe.com/t5/msa-storage/msa-2012i-mapping/m-p/1082127#M4837 Hi - Had to rebuild my Virtual disk on MSA 2012i. Put it back and created a volume and mapped it.<BR /> <BR /> Question is how do I make it visible on the fileserver?<BR /> <BR /> Connect drive?<BR /> \\ipaddress\nickname? TIA<BR /> <BR /> Was looking for an example in manual but did not find. Thu, 14 May 2009 11:46:16 GMT https://community.hpe.com/t5/msa-storage/msa-2012i-mapping/m-p/1082127#M4837 Dane Groszek 2009-05-14T11:46:16Z https://community.hpe.com/t5/msa-storage/msa-2012i-mapping/m-p/1082128#M4838 No, this is not a file share - you have to enter the IP address to the iSCSI initiator and perform a target discovery.<BR />How to do that? Well that depends on the operating system, which you kept as a secret ;-) Thu, 14 May 2009 12:04:36 GMT https://community.hpe.com/t5/msa-storage/msa-2012i-mapping/m-p/1082128#M4838 Uwe Zessin 2009-05-14T12:04:36Z