https://community.hpe.com/t5/msa-storage/eva4100-unmappable-controller-after-adding-disk-enclosure/m-p/1088816#M4882 Hello, <BR /> <BR /> I have problems after adding a third disk enclosure with 6 FATA disk to an EVA4100. The Controller A is under "a new" Controller enclosure 1 in Unmappable Hardware, not in the Rack section, in hardware (its with the yellow alarm).<BR /> Ive tried to restart that controller, restart the Command View server, but theres no solution, remains the error (from 2 days ago).<BR /> I need to add the disk to a group disk, and at this moment i dont know how to do (restart the EVA??...i dont wanna do it...of course...).<BR /> <BR /> Any ideas??, thanks a lot Mon, 15 Jun 2009 06:28:49 GMT Jorge HP 2009-06-15T06:28:49Z https://community.hpe.com/t5/msa-storage/eva4100-unmappable-controller-after-adding-disk-enclosure/m-p/1088816#M4882 Hello, <BR /> <BR /> I have problems after adding a third disk enclosure with 6 FATA disk to an EVA4100. The Controller A is under "a new" Controller enclosure 1 in Unmappable Hardware, not in the Rack section, in hardware (its with the yellow alarm).<BR /> Ive tried to restart that controller, restart the Command View server, but theres no solution, remains the error (from 2 days ago).<BR /> I need to add the disk to a group disk, and at this moment i dont know how to do (restart the EVA??...i dont wanna do it...of course...).<BR /> <BR /> Any ideas??, thanks a lot Mon, 15 Jun 2009 06:28:49 GMT https://community.hpe.com/t5/msa-storage/eva4100-unmappable-controller-after-adding-disk-enclosure/m-p/1088816#M4882 Jorge HP 2009-06-15T06:28:49Z