https://community.hpe.com/t5/msa-storage/e-port-segmented-incompatible/m-p/1089307#M4889 Hi Daniel,<BR /><BR />Try logging in via telnet and running the "fabstatsshow" command. It will tell you why the fabrics segmented.<BR /><BR />Cheers,<BR /><BR />Curt Thu, 18 Jun 2009 13:06:54 GMT krusty 2009-06-18T13:06:54Z https://community.hpe.com/t5/msa-storage/e-port-segmented-incompatible/m-p/1089305#M4887 Hi to all,<BR /> <BR /> I have one SAN Switch (Compaq 16 port 1Gbps) in which I have configure the SAN, and I'm trying to add another switch (HP StorageWorks SAN Switch 2/16 2Gbps). <BR /> <BR /> I connected the fiber channel on port 0 in each switch, but I obtain the following message when use the switchshow command:<BR /> <BR /> port 0: sw Online E-Port (segmented,incompatible)<BR /> <BR /> Somebody can help me?<BR /> <BR /> Regards? Wed, 17 Jun 2009 15:26:49 GMT https://community.hpe.com/t5/msa-storage/e-port-segmented-incompatible/m-p/1089305#M4887 Daniel A 2009-06-17T15:26:49Z https://community.hpe.com/t5/msa-storage/e-port-segmented-incompatible/m-p/1089306#M4888 Have you tried defzone -allaccess on the new switch? Thu, 18 Jun 2009 07:13:39 GMT https://community.hpe.com/t5/msa-storage/e-port-segmented-incompatible/m-p/1089306#M4888 CLEB 2009-06-18T07:13:39Z https://community.hpe.com/t5/msa-storage/e-port-segmented-incompatible/m-p/1089307#M4889 Hi Daniel,<BR /><BR />Try logging in via telnet and running the "fabstatsshow" command. It will tell you why the fabrics segmented.<BR /><BR />Cheers,<BR /><BR />Curt Thu, 18 Jun 2009 13:06:54 GMT https://community.hpe.com/t5/msa-storage/e-port-segmented-incompatible/m-p/1089307#M4889 krusty 2009-06-18T13:06:54Z