topic Re: 352 FC Switch in MSA Storage

352 FC Switch

Joseph Callen — Fri, 26 Jun 2009 00:54:39 GMT

Hopefully someone can help me. I just purchased on eBay a 352 FC Switch for a project at home. I don't know what the password is. I tried what I think is the default password of 'password', but of course that doesn't work. Does anyone know the procedure to reset the password? Thanks.

30-10010-02, REV. A2
372282-001
Serial: MY20537960

System Name : Model 352 FC Switch
Location :
Contact : HP Field Service
MAC ID : 00 10 9b 05 43 62
Serial Number : Z46S6116863
Switching Mode : on
OS Error Threshold : 16777215
CRC Error Threshold : 3
Blocking Arbitration: xFF
Switch FW Version : 2.07 (build 12)
SOC Version : 2
Switch HW Version : 3
MIB Version : 1.2
Speed : twoGig
Fault Status : ok
SOC Status : ok
Current Time : 06/25/2009 21:50:18
System Up Time : 0 Days 00:31:17
IP Address : 192.168.1.129
Netmask : 255.255.255.0
Default Gateway : 192.168.1.1

Re: 352 FC Switch

michael mateo — Fri, 19 Feb 2010 16:27:26 GMT

Hello there, It seems that We are having the same issue. I notice that you didn't recieve a response, is that due to being a very difficult pronblem? We have a very tight team that has over come many obsticale, but thisa password protected 352 fc switch has stumped us over and over. CAn any one please help>>>>>

Re: 352 FC Switch

Joseph Callen — Fri, 19 Feb 2010 18:09:49 GMT

I am currently still using this switch, it just has the one zone which for me is OK. I really wanted learn zoning. I did read somewhere that there maybe a security vulnerability with the webserver that the switch runs so you maybe able to exploit that since no one can help. I even tried to contact Emulex that actually manufactures the switch - no luck with them either, they said to call Apple :)

Re: 352 FC Switch

Mazzif — Fri, 07 Nov 2014 20:35:41 GMT

serrious necro post here, but I had the same issue as the others here. My Solution:

at the root promt type lib and press Enter

using the code that is displayed in the console promt, find your match in the table below and enter that code:

Number provided by the "lib" command Temporary password
141180 298138-184768
141181 193983-839183
141182 391878-183948
141183 457829-926274
141184 301983-729402
141185 928718-001918
141186 672817-339201
141187 338918-220022
141188 112394-991023
141189 392093-001938
141190 120939-102393
141191 193049-991039
141192 310833-110110
141193 238961-018933
141194 718928-019381
141195 232389-991039
141196 891083-139918
141197 189368-018998
141198 286136-189996
141199 489183-193791
141200 548918-001937
141201 386189-183087
141202 189837-198083
141203 231338-366111
141204 689183-813331
141205 891733-112228
141206 346555-157762
141207 222687-888713
141208 718936-186688
141209 133265-337612

Starting Application
Please Wait...
Enter Password
*************
Invalid Password, logging in as visitor.

root Menu:
1. show - Go to show sub-menu.
2. ? - Help

Next Press 3 and Press Enter to get to the Eng Menu

root>lib
141192>310833-110110

(eng)root>3

eng Menu:
1. get - Get MIB data.
2. set - Set MIB data.
3. prttx - Control port transmitter.
4. snoop - Set port to snoop another.
5. esnoop - Set port to snoop another using enhanced snoop method.
6. dump - Dumps the register content for a feature.
7. lipprt - Lip Port
8. eecrc - Set the CRC
9. eestrk - Set Trunking configuration in EEPROM.
10. eegtrk - Get the Trunking Info from EEPROM
11. eewr - Write to EEPROM
12. eerd - Read from EEPROM
13. clrpass - Set passwords back to default.
14. eesync - Synchronize current settings with EEPROM.
15. files - Display the Flash files on the switch.
16. view - Display the content of a file.
17. clrffs - Clear the flash file system. Requires reboot to use again.
18. blk - Show block entries
19. wron - turn write debug on or off.
20. imode - Query the SOC interface mode.
21. sev - Configure event log severity filter level.
22. fault - Configure event log severity fault threshold.
23. teltime - Get and set the telnet timeout value.
24. except - View and clear CPU exception information
25. engfile - Get and set access to eng level file upload
26. mac - Configure the ethernet MAC address.
27. sn - Configure the unit serial number.
28. tftp - Load new config files using TFTP.
29. .. - Go back
30. ? - Help
(eng)root/eng>

From here you can issue clrpass or clrffs commands t clear password and flash

From here press .. and Press Enter to go back a menu

Press 1 and Press Enter to go into Config mneu

(eng)root>1

config Menu:
1. save - Save current system configuration.
2. sys - Go to the system configuration sub-menu.
3. default - Set to factory default.
4. port - Go to port configuration sub-menu.
5. password - Change administrative password.
6. load - Go to load balancing configuration sub-menu.
7. trunk - Go to trunking configuration sub-menu.
8. network - Go to network configuration sub-menu.
9. zone - Go to zone configuration sub-menu.
10. .. - Go back
11. ? - Help
(eng)root/config>

Option 5 to reset Password still asks for current password, so Im guessing 'password" is not the default, but...we can still config all paramiters of the switch I think...

Hope this helps someone

Re: 352 FC Switch

Mazzif — Mon, 10 Nov 2014 16:29:00 GMT

After a little more messing, I found the default password to be hpservice

Hope this helps someone else out there.