topic Volume mapping issue? in MSA Storage

Volume mapping issue?

Blixl — Tue, 03 Nov 2009 07:13:21 GMT

Hi!
I have a strange case regarding access mappings to LUNs. If I specify lets say 2 hosts and set All other hosts to none access, the LUN number does not show in the LUN information page. In the overview for the volume it shows LUN None. If I select the LUN I can see the hosts I specified having the LUN number specified. Is this behavior normal? Does it mean that I have to exclude every host that should not have access to the LUN if I allow all other hosts have access?
This happens on a MSA 2012fc dual controller system.

Re: Volume mapping issue?

Uwe Zessin — Tue, 03 Nov 2009 07:27:22 GMT

Can you create some screenshots please?

(simple .JPG or .PNG stored in a .ZIP file and attached to the respones -- no .DOC, please) - thanks.

Re: Volume mapping issue?

Blixl — Tue, 03 Nov 2009 07:36:45 GMT

Here's the screenshots attached

Re: Volume mapping issue?

skt_skt — Wed, 04 Nov 2009 10:26:40 GMT

Dont you have zoning or Access Logic configured?

Re: Volume mapping issue?

Blixl — Wed, 04 Nov 2009 13:16:01 GMT

Hi!
Zonig is configured