https://community.hpe.com/t5/msa-storage/msa2012-controllers/m-p/1123725#M5300 Hi<BR /> I have HP MSA2012 dual controllers with two enclosures(14 drives). <BR /> Today I got back a controller from reprogramming and i replaced also 2 drives.<BR /> Before I mounted the units I turn off the power (from the back).After I finish with the mounting issue I turn on the power and I logged in to the controller gui.In the "Help Bar" I have for the last 4 hours the following message :"Code load in Progress. Do not Interrupt or power off the unit". <BR /> The status of my drives is "Down" and all their info is shown as "Not Found" and the Virtual Disk Status is "Offline".<BR /> <BR /> Please advice,<BR /> <BR /> Best regards<BR /> Ayden G <BR /> Tue, 08 Dec 2009 14:44:42 GMT ayden gordon 2009-12-08T14:44:42Z https://community.hpe.com/t5/msa-storage/msa2012-controllers/m-p/1123725#M5300 Hi<BR /> I have HP MSA2012 dual controllers with two enclosures(14 drives). <BR /> Today I got back a controller from reprogramming and i replaced also 2 drives.<BR /> Before I mounted the units I turn off the power (from the back).After I finish with the mounting issue I turn on the power and I logged in to the controller gui.In the "Help Bar" I have for the last 4 hours the following message :"Code load in Progress. Do not Interrupt or power off the unit". <BR /> The status of my drives is "Down" and all their info is shown as "Not Found" and the Virtual Disk Status is "Offline".<BR /> <BR /> Please advice,<BR /> <BR /> Best regards<BR /> Ayden G <BR /> Tue, 08 Dec 2009 14:44:42 GMT https://community.hpe.com/t5/msa-storage/msa2012-controllers/m-p/1123725#M5300 ayden gordon 2009-12-08T14:44:42Z