https://community.hpe.com/t5/msa-storage/resetting-the-configuration/m-p/1141765#M5463 Hi,<BR /> <BR /> I have configured ACLs on the switch but now I am not able to connect either. Is there a way to reset the configuration of the switch? I have 2 SAN switches so redundancy is not a problem. Kindly advise. Thanks in advance.<BR /> <BR /> REgards.<BR /> Sedat Thu, 11 Mar 2010 06:40:47 GMT sedat oktem 2010-03-11T06:40:47Z https://community.hpe.com/t5/msa-storage/resetting-the-configuration/m-p/1141765#M5463 Hi,<BR /> <BR /> I have configured ACLs on the switch but now I am not able to connect either. Is there a way to reset the configuration of the switch? I have 2 SAN switches so redundancy is not a problem. Kindly advise. Thanks in advance.<BR /> <BR /> REgards.<BR /> Sedat Thu, 11 Mar 2010 06:40:47 GMT https://community.hpe.com/t5/msa-storage/resetting-the-configuration/m-p/1141765#M5463 sedat oktem 2010-03-11T06:40:47Z https://community.hpe.com/t5/msa-storage/resetting-the-configuration/m-p/1141766#M5464 I have forgotten to mention about the model. Thanks again.<BR /><BR />Brocade 4/12 SAN Switch for HP c-Class BladeSystem Thu, 11 Mar 2010 06:54:28 GMT https://community.hpe.com/t5/msa-storage/resetting-the-configuration/m-p/1141766#M5464 sedat oktem 2010-03-11T06:54:28Z