https://community.hpe.com/t5/msa-storage/iscsi-multipath-not-working/m-p/5546699#M6315 <DIV><P>Hi,</P><P>I've HP MSA 2000 with 2 controllers on it and 2 windows 2K8 R2 SP1 ENT config with HyperV cluster.</P><P>i've setup the cluster correctly but i've trouble with setup the iscsi multipath to work(failover to other NIC works good).</P><P>i can't set the multipath to work with round roubin,&nbsp;only with round roubin with subset,this method&nbsp;not use both iscsi nic at the same time.</P><P>i use the MPIO that built-in windows.</P><P>what i'm doing wrong here that i can't set it to work with both nic?</P><P>THX</P></DIV> Sat, 11 Feb 2012 18:55:44 GMT Avi_g 2012-02-11T18:55:44Z https://community.hpe.com/t5/msa-storage/iscsi-multipath-not-working/m-p/5546699#M6315 <DIV><P>Hi,</P><P>I've HP MSA 2000 with 2 controllers on it and 2 windows 2K8 R2 SP1 ENT config with HyperV cluster.</P><P>i've setup the cluster correctly but i've trouble with setup the iscsi multipath to work(failover to other NIC works good).</P><P>i can't set the multipath to work with round roubin,&nbsp;only with round roubin with subset,this method&nbsp;not use both iscsi nic at the same time.</P><P>i use the MPIO that built-in windows.</P><P>what i'm doing wrong here that i can't set it to work with both nic?</P><P>THX</P></DIV> Sat, 11 Feb 2012 18:55:44 GMT https://community.hpe.com/t5/msa-storage/iscsi-multipath-not-working/m-p/5546699#M6315 Avi_g 2012-02-11T18:55:44Z