topic Re: Upgrading EVA4400 firmware & CommandView version in MSA Storage

Upgrading EVA4400 firmware & CommandView version

Yaboto — Mon, 23 Apr 2012 12:22:39 GMT

Hi,

Currently I have Command View version 9.01 and EVA controller firmware version 09534000. I want to upgrade them to the latest compatible versions possible.

Please advise.

Yaboto

Re: Upgrading EVA4400 firmware & CommandView version

Amar_Joshi — Mon, 23 Apr 2012 13:27:56 GMT

Hello Yaboto,

Latest firmware (XCS) for EVA4400 is 10100000 and avaialble at:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T4256-63147

To install this firmware you need to go to Command View v10.0 first. It's available at :

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV10

If you need to find yourself next new releases, please go to http://software.hp.com and search for key words there.

Hope that helps.

Re: Upgrading EVA4400 firmware & CommandView version

Johan Guldmyr — Mon, 23 Apr 2012 16:28:48 GMT

After you've downloaded the softwares you should read the HP P6000 EVA Updating Product Software Guide,

you can find it here

Re: Upgrading EVA4400 firmware & CommandView version

SUBHAJIT KHANBARMAN_1 — Mon, 30 Apr 2012 16:03:30 GMT

I am surprised that you are running with CV EVA 9.01 along with XCS09534000 which is not supported. XCS0953x000 supports from CV EVA 9.1. Attached is the old Compatibility guide for your reference.

The upgrade path for CV EVA in your case,

9.0.1 -> 9.1

9.1 -> 9.2

9.2-> 10.0

In order to avoid all the above you need to uninstall CV EVA 9.0.1, reboot the server and go for the fresh installation of CV EVA 10 from the below link,

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV10

XCS10100000 firmware download link,

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T4256-63147

XCS10100000 release notes download link,

http://h10032.www1.hp.com/ctg/Manual/c03284897.pdf

XCS10100000 firmware upgrade guide download link,

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02858292/c02858292.pdf

All other details related to XCS upgrade you can find in the following customer advisory,

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03287750&jumpid=em_alerts_us-us_Apr12_xbu_all_all_1702180_112092_storagesoftware_critical_006_1

It is recommended that HP Command View 10.0 is used to manage the HP Enterprise Virtual Array with controller software XCS 10100000. So please find the following advisory which will help you to understand better,

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=3664763&prodTypeId=12169&objectID=c03078148

Please find the link to get latest Compatibility guide,

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02523047/c02523047.pdf

Re: Upgrading EVA4400 firmware & CommandView version

Raymond E. Lilly — Mon, 30 Apr 2012 19:37:23 GMT

Does anyone know where to find the 9.1 -> 9.2 upgrade package?

Re: Upgrading EVA4400 firmware & CommandView version

Johan Guldmyr — Tue, 01 May 2012 04:36:04 GMT

I believe you need to call hp to get it.

Re: Upgrading EVA4400 firmware & CommandView version

SUBHAJIT KHANBARMAN_1 — Thu, 03 May 2012 11:13:42 GMT

I am not sure why you are looking for CV EVA 9.2.........I would suggest to go for the complete uninstallation of old CV EVA and go for the latest CV EVA10........because it is always good to run your EVA with latest XCS and to run with latest management software as well.

CV EVA 9.2 not available in public sites. You need to contact hp.

Re: Upgrading EVA4400 firmware & CommandView version

Torsten. — Thu, 03 May 2012 11:59:20 GMT

The latest firmware XCS 10100000 works only with command view 10 or later, cv version 9.2 supports xcs up to version XCS 0953x000.

So you need

XCS 10100000

and

command view 10.

Uninstall the old CV version and install the new version.

Re: Upgrading EVA4400 firmware & CommandView version

Domenic_Alvaro — Mon, 07 May 2012 07:09:13 GMT

I want to upgrade from 09534000 to 10100000 with array-based management. I can't find any information about which management controller firmware I need, or where to find it.

Management module firmware is currently mmp-0001.4000-CR05B2. Do I need to update this? If so, where do I get the latest version?

Thanks,

Domenic

Re: Upgrading EVA4400 firmware & CommandView version

Johan Guldmyr — Mon, 07 May 2012 07:10:28 GMT

Hi,

management module firmware is included in the CV .iso.

When you upgrade CV on the management module it should upgrade the mm firmware as well.

Re: Upgrading EVA4400 firmware & CommandView version

Domenic_Alvaro — Mon, 07 May 2012 07:11:39 GMT

Wow! Thanks for the super-quick reply.

Re: Upgrading EVA4400 firmware & CommandView version

kmouline — Fri, 29 Mar 2013 11:11:36 GMT

Hello Dears,

The firmware and CV upgrade can have an incidence on the production storage system ?

Thank you,

Re: Upgrading EVA4400 firmware & CommandView version

Sapic — Thu, 20 Jun 2013 02:35:30 GMT

Hello all,

I am new for this EVA4400..

At my place currently Command View version is 8.0..

How can i upgrade CV to version 9??

I am already search for version 9, but cant find any..

Anyone can help me plz???

tq..

Re: Upgrading EVA4400 firmware & CommandView version

Torsten. — Thu, 20 Jun 2013 04:43:44 GMT

current version 10.2:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV10.2

Re: Upgrading EVA4400 firmware & CommandView version

Sapic — Fri, 21 Jun 2013 08:21:44 GMT

Thx 4 da replied..

But, actually im lookin 4 CV ver 9.. =(

Re: Upgrading EVA4400 firmware & CommandView version

Torsten. — Fri, 21 Jun 2013 17:53:03 GMT

Why version 9?

Version 9.4 is here:
(last version for 3000/5000):

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV

Re: Upgrading EVA4400 firmware & CommandView version

Sapic — Sat, 22 Jun 2013 02:26:11 GMT

can ver8 upgrade straight away to ver10??

and is the link given compatible wit 4400??

torsten..

tq 4 u help sir..

i really appreciate..

Re: Upgrading EVA4400 firmware & CommandView version

Torsten. — Mon, 24 Jun 2013 15:31:01 GMT

Uninstall commandview, reboot, install the new version.

Current firmware XCS 11001100 needs command view 10.2.

Re: Upgrading EVA4400 firmware & CommandView version

Sapic — Thu, 11 Jul 2013 07:32:49 GMT

Hye..

i successfully upgrade cv to 10.2

prob now is when i want to upgrade controller firmware to xcs11001100 it show base port changed..

why it happen???

Re: Upgrading EVA4400 firmware & CommandView version

doOdzZZ — Wed, 25 Jun 2014 09:55:35 GMT

Hello,

I upgraded the ABM module on my EVA4400 to CV10.3 and now when I am trying to upgrade the firmware to 11001100, when I reach the point where I click next after I browse for the SSS file, I get redirected to the page where it says that the base port has changed.

Thank you in advance.