topic Re: Resetting the EVA Management Module in MSA Storage

Resetting the EVA Management Module

Mauro Livi — Fri, 08 Feb 2013 20:20:03 GMT

Hi all,

Can the EVA Management module be reset while the EVA is up and running (and initialized) without interrupting anything?

I may need to reset the port but I've never had to do it before. I'd hate to interrupt access to the EVA since this is a production environment.

My Command View is up and working fine, I may simply have to reset the EVA management (to make a change to its IP). Any danger of doing this while the EVA is operating?

Any response is greatly appreciated.

Thanks

Mauro

Re: Resetting the EVA Management Module

giladzzz — Sun, 10 Feb 2013 18:04:57 GMT

there is no danger in resseting the managment module you can even take it out while the EVA is working it has no use

when the system is up and running.

read how to replace managment module

http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01367908&printver=true

Regards

Re: Resetting the EVA Management Module

KurtG — Tue, 12 Feb 2013 00:03:58 GMT

Revert back to default setup (of the card, not the EVA) by preseing the reset button in 10+ sec. (You notice a change in the link leds on the TP port).

KurtG