topic Re: Web Tools: problem with Zone Admin after upgrading to FOS 6.2.2f in MSA Storage

Web Tools: problem with Zone Admin after upgrading to FOS 6.2.2f

Maarten Van Parys — Fri, 12 Jul 2013 15:26:04 GMT

Hello,

Situation was a fabric with 2 switches (Brocade BladeSystem 4/24 SAN Switch) with FOS v6.1.0g. After upgrading one switch to version 6.2.2f and opening Zone Admin on that switch I can only select ports from the that switch. If I open Zone Admin for the second time I get error "Cannot load information from Fabric, the web server on the switch might be down, try later or refresh". On the switch with older firmware nothing has changed.

Any ideas?

Thanks,

Maarten.

Re: Web Tools: problem with Zone Admin after upgrading to FOS 6.2.2f

nightwatchman — Wed, 17 Jul 2013 14:20:19 GMT

Hi Maarten,

Can you run supportshow and paste the logs here?

Re: Web Tools: problem with Zone Admin after upgrading to FOS 6.2.2f

jitter77 — Wed, 24 Jul 2013 11:54:10 GMT

Hello Maarten,

At the later release of Brocade FOS, Brocade split the hardware management and Software management from webtools, such as zone changes...FC Routing, you will need to setup via DCFM or BNA or CLIs; we can only perform hardware level maintenance activities from Webtools.