https://community.hpe.com/t5/msa-storage/enterprise-backup-solution/m-p/419771#M773 How is this zoned? Do you have all the hosts zoned with the NSR port(s)? Check that.<BR />Also, you need to read the User Guide very carefully with regards to the port mapping and discovery configuration. Mon, 30 Aug 2004 08:00:30 GMT CA868802 2004-08-30T08:00:30Z https://community.hpe.com/t5/msa-storage/enterprise-backup-solution/m-p/419770#M772 I have just implemented an enterprise backup solution for three servers. My components include: <BR /> -hp StorageWorkd Robotic Library MSL5000 series<BR /> -network storage router e1200-160<BR /> -compaq StorageWorks fibre channel SAN Switch <BR /> 2/8el (with SW 2x FC Transceivers) <BR /> -hp StorageWorks fca2355 dual channel PCI host <BR /> bus adapter <BR /> <BR /> I have implemented a similar solution using the n1200 storage router and I didn't have any problems. i am having problem with the e1200 router. I have configured the router and it discovered the SCSI Bus devices (Robotic Library) but it didn't discover the fibre channel port devices (hosts). I have disconnected the SAN switch and connected directly to one of the Hosts but it still didn't discover it. What can i do.<BR /> <BR /> Fri, 27 Aug 2004 05:26:36 GMT https://community.hpe.com/t5/msa-storage/enterprise-backup-solution/m-p/419770#M772 olamide badmus 2004-08-27T05:26:36Z https://community.hpe.com/t5/msa-storage/enterprise-backup-solution/m-p/419771#M773 How is this zoned? Do you have all the hosts zoned with the NSR port(s)? Check that.<BR />Also, you need to read the User Guide very carefully with regards to the port mapping and discovery configuration. Mon, 30 Aug 2004 08:00:30 GMT https://community.hpe.com/t5/msa-storage/enterprise-backup-solution/m-p/419771#M773 CA868802 2004-08-30T08:00:30Z