https://community.hpe.com/t5/msa-storage/want-to-verify-answers-please-help-thanl-you/m-p/3767530#M8010 Please help me out with these question as i want to verify the answers:<BR />-----------------------------------------------<BR />Q1. In secure path Manager,the controller designations feature displays controller A and controller B in the GUI What does Secure Path use to reference Controller A and B?<BR /><BR />a. serial number<BR />b. physical location in MSA 1000.<BR /><BR />Anwers a but want to verify i think its wrong.<BR /><BR />Q2.Using Command Line Interface, which command is used to add space to a specific LUN on an MSa 1000?<BR /><BR />a. set unit<BR />b. add unit <BR />c. extend unit<BR />d. expand unit<BR /><BR />answer is C but want to verify.<BR /><BR />Q3. Which utility allows you to change the fibre channel parameters for and Emulex host bus adapter (HBA) connected to the MSA1000 subsystem?<BR /><BR />a.Light pulse Utility<BR />b.HP Insight Manager<BR />c. Array Dianostic Utility<BR />d.Brocade Advance Web tools.<BR /><BR />Answer is A but want to verify.<BR /><BR />Q4. Two MSA SAN Switch 2/8's and one MSA1000 Controller in the same subsystem. What need to be done to make the controller acess both controller?<BR /><BR />a. An inter-switch Link (ISL) need to be installed b/w the two switches.<BR /><BR />b.the switches need to be configured with a Brocade Advance web tools.<BR />c.SSP needs to be enabled for this installation.<BR /><BR />Answer is A but want to verify.<BR /><BR />Q5. In an SAN configration HOst H1 can acess drives D0 and D1, but cannot access Drive D2 on the MSA 1000. what are the two possible causes? choose two.<BR /><BR />a. MSA1000 active controller failed.<BR />b. HBA drivers are installed incorrectly.<BR />c. SSP is enabled and H1 is not in the ACL for D2.<BR />d. Zoning is enabled and is preventing access to D2.<BR /><BR />Answer is B and C but want to verify. Thu, 06 Apr 2006 14:49:24 GMT Muhammad Shamroze 2006-04-06T14:49:24Z https://community.hpe.com/t5/msa-storage/want-to-verify-answers-please-help-thanl-you/m-p/3767530#M8010 Please help me out with these question as i want to verify the answers:<BR />-----------------------------------------------<BR />Q1. In secure path Manager,the controller designations feature displays controller A and controller B in the GUI What does Secure Path use to reference Controller A and B?<BR /><BR />a. serial number<BR />b. physical location in MSA 1000.<BR /><BR />Anwers a but want to verify i think its wrong.<BR /><BR />Q2.Using Command Line Interface, which command is used to add space to a specific LUN on an MSa 1000?<BR /><BR />a. set unit<BR />b. add unit <BR />c. extend unit<BR />d. expand unit<BR /><BR />answer is C but want to verify.<BR /><BR />Q3. Which utility allows you to change the fibre channel parameters for and Emulex host bus adapter (HBA) connected to the MSA1000 subsystem?<BR /><BR />a.Light pulse Utility<BR />b.HP Insight Manager<BR />c. Array Dianostic Utility<BR />d.Brocade Advance Web tools.<BR /><BR />Answer is A but want to verify.<BR /><BR />Q4. Two MSA SAN Switch 2/8's and one MSA1000 Controller in the same subsystem. What need to be done to make the controller acess both controller?<BR /><BR />a. An inter-switch Link (ISL) need to be installed b/w the two switches.<BR /><BR />b.the switches need to be configured with a Brocade Advance web tools.<BR />c.SSP needs to be enabled for this installation.<BR /><BR />Answer is A but want to verify.<BR /><BR />Q5. In an SAN configration HOst H1 can acess drives D0 and D1, but cannot access Drive D2 on the MSA 1000. what are the two possible causes? choose two.<BR /><BR />a. MSA1000 active controller failed.<BR />b. HBA drivers are installed incorrectly.<BR />c. SSP is enabled and H1 is not in the ACL for D2.<BR />d. Zoning is enabled and is preventing access to D2.<BR /><BR />Answer is B and C but want to verify. Thu, 06 Apr 2006 14:49:24 GMT https://community.hpe.com/t5/msa-storage/want-to-verify-answers-please-help-thanl-you/m-p/3767530#M8010 Muhammad Shamroze 2006-04-06T14:49:24Z