https://community.hpe.com/t5/msa-storage/identifying-unused-disks-in-a-hsg80/m-p/432374#M855 Sure. Do a:<BR />&gt; show disks<BR /><BR />the rightmost column says 'Used by' - if that column is empty, then the disk is unused.<BR /><BR />There might be disks that are not made known to the controller(s) - in that case start with:<BR />&gt; run config Wed, 29 Sep 2004 02:29:09 GMT Uwe Zessin 2004-09-29T02:29:09Z https://community.hpe.com/t5/msa-storage/identifying-unused-disks-in-a-hsg80/m-p/432373#M854 Is there a way from the CLI to identify disks that are in the array but not part of a RAID/Mirror set?<BR /> <BR /> Thanks<BR /> Tue, 28 Sep 2004 18:32:39 GMT https://community.hpe.com/t5/msa-storage/identifying-unused-disks-in-a-hsg80/m-p/432373#M854 CA1094913 2004-09-28T18:32:39Z https://community.hpe.com/t5/msa-storage/identifying-unused-disks-in-a-hsg80/m-p/432374#M855 Sure. Do a:<BR />&gt; show disks<BR /><BR />the rightmost column says 'Used by' - if that column is empty, then the disk is unused.<BR /><BR />There might be disks that are not made known to the controller(s) - in that case start with:<BR />&gt; run config Wed, 29 Sep 2004 02:29:09 GMT https://community.hpe.com/t5/msa-storage/identifying-unused-disks-in-a-hsg80/m-p/432374#M855 Uwe Zessin 2004-09-29T02:29:09Z