https://community.hpe.com/t5/msa-storage/hsg80-more-problems/m-p/435512#M859 Since my earlier message about performance issues, the controller in this unit failed. I have replaced the controller in the HSG80 and this is now fine however, I now had another problem. After changing the controller I have two SAN's showing up in HSG element manager the "old" one with one correct and one incorrect controller and a "new" one with the old working controller and the new one that I had just put in. I assumed it was just a recognition thing so I restarted my SMA and now I can't see the SAN at all!<BR /> <BR /> I have tried the run discovery from element manager but it still won't see the SAN.<BR /> <BR /> Any ideas as to why it won't show (i've checked the zoning)?<BR /> <BR /> btw: I currently have automange option enabled which I assumed would pickup up the SAN when the SMA was rebooted? Tue, 05 Oct 2004 09:52:06 GMT BR824100 2004-10-05T09:52:06Z https://community.hpe.com/t5/msa-storage/hsg80-more-problems/m-p/435512#M859 Since my earlier message about performance issues, the controller in this unit failed. I have replaced the controller in the HSG80 and this is now fine however, I now had another problem. After changing the controller I have two SAN's showing up in HSG element manager the "old" one with one correct and one incorrect controller and a "new" one with the old working controller and the new one that I had just put in. I assumed it was just a recognition thing so I restarted my SMA and now I can't see the SAN at all!<BR /> <BR /> I have tried the run discovery from element manager but it still won't see the SAN.<BR /> <BR /> Any ideas as to why it won't show (i've checked the zoning)?<BR /> <BR /> btw: I currently have automange option enabled which I assumed would pickup up the SAN when the SMA was rebooted? Tue, 05 Oct 2004 09:52:06 GMT https://community.hpe.com/t5/msa-storage/hsg80-more-problems/m-p/435512#M859 BR824100 2004-10-05T09:52:06Z