https://community.hpe.com/t5/msa-storage/boot-from-msa1000/m-p/189970#M88 I have 5 identical ML350G3 servers with FCA2101 hba's. The first server i have set up for boot from san, no problems there. <BR /> However the additional servers can not see their respective bootdevices when configuering the HBA. I follow the whitepaper "Boot fra MSA1000" to a tee.<BR /> I have created a LUN for each server to boot from, and assigned it to the proper HBA using SSP. But its a no go.<BR /> I have updated firmware and drives to the latest editions, tried different Scan settings (bullet point 6) in the HBA bios config.<BR /> The servers are unable to see their boot LUN.<BR /> When booting from the MSA1000-cd the servers kan see the MSA1000, and its arrays and LUN's. <BR /> What to do ?<BR /> Wed, 19 Feb 2003 13:59:47 GMT BR734478 2003-02-19T13:59:47Z https://community.hpe.com/t5/msa-storage/boot-from-msa1000/m-p/189970#M88 I have 5 identical ML350G3 servers with FCA2101 hba's. The first server i have set up for boot from san, no problems there. <BR /> However the additional servers can not see their respective bootdevices when configuering the HBA. I follow the whitepaper "Boot fra MSA1000" to a tee.<BR /> I have created a LUN for each server to boot from, and assigned it to the proper HBA using SSP. But its a no go.<BR /> I have updated firmware and drives to the latest editions, tried different Scan settings (bullet point 6) in the HBA bios config.<BR /> The servers are unable to see their boot LUN.<BR /> When booting from the MSA1000-cd the servers kan see the MSA1000, and its arrays and LUN's. <BR /> What to do ?<BR /> Wed, 19 Feb 2003 13:59:47 GMT https://community.hpe.com/t5/msa-storage/boot-from-msa1000/m-p/189970#M88 BR734478 2003-02-19T13:59:47Z