https://community.hpe.com/t5/msa-storage/adding-drive-space-error/m-p/447303#M930 By the this is a MSA1000<BR /><BR />Ron Wed, 03 Nov 2004 10:45:15 GMT CA1206817 2004-11-03T10:45:15Z https://community.hpe.com/t5/msa-storage/adding-drive-space-error/m-p/447302#M929 We have a 14 disk that are 72.8GB. We have one logical drive that is 530GB another that is 55MB. Each logical drives is an array with the larger having a stripe size of 16kb and the smaller having a stripe size of 8kb. Also both arrays share the same set of disk.<BR /> <BR /> I'm trying to add 100GB to the 530GB logical drive. The error I get is this:<BR /> <BR /> The actual new volume size will be 633119MB<BR /> Unit extension failed<BR /> unit 1 us NOT extended because of volume overlapping<BR /> <BR /> <BR /> I have not been able to find much on this hope someone can help me out.<BR /> <BR /> Thank you, <BR /> <BR /> Ron<BR /> Wed, 03 Nov 2004 10:43:27 GMT https://community.hpe.com/t5/msa-storage/adding-drive-space-error/m-p/447302#M929 CA1206817 2004-11-03T10:43:27Z https://community.hpe.com/t5/msa-storage/adding-drive-space-error/m-p/447303#M930 By the this is a MSA1000<BR /><BR />Ron Wed, 03 Nov 2004 10:45:15 GMT https://community.hpe.com/t5/msa-storage/adding-drive-space-error/m-p/447303#M930 CA1206817 2004-11-03T10:45:15Z