https://community.hpe.com/t5/msa-storage/smartarray-5302/m-p/3149473#M9499 I've just bought a ML370 G3 with 6 72 GB HD and a Smartarray 5302. I want to installa Sco Open Server 5.0.7.<BR />The problem is to configure array so that i can use RAID 1 with this OS.<BR />When i start the server there is no message regarding the activation of the ORCA procedure (but I can see the six HD (SCSI ID 0 to 5) and the smart array controller on the 3rd PCI slot). If I use the SmartStart 6.40 CD, i can see the controller but not the six hard disks.<BR />Where is the problem ?<BR />Thanks in advance. Fri, 19 Dec 2003 09:43:31 GMT Gerardo Zenga 2003-12-19T09:43:31Z https://community.hpe.com/t5/msa-storage/smartarray-5302/m-p/3149473#M9499 I've just bought a ML370 G3 with 6 72 GB HD and a Smartarray 5302. I want to installa Sco Open Server 5.0.7.<BR />The problem is to configure array so that i can use RAID 1 with this OS.<BR />When i start the server there is no message regarding the activation of the ORCA procedure (but I can see the six HD (SCSI ID 0 to 5) and the smart array controller on the 3rd PCI slot). If I use the SmartStart 6.40 CD, i can see the controller but not the six hard disks.<BR />Where is the problem ?<BR />Thanks in advance. Fri, 19 Dec 2003 09:43:31 GMT https://community.hpe.com/t5/msa-storage/smartarray-5302/m-p/3149473#M9499 Gerardo Zenga 2003-12-19T09:43:31Z