https://community.hpe.com/t5/hpe-msa-storage/secure-path-and-msa1500-problem/m-p/3609322#M9619 Hi,<BR />my customer say that after the SP 4.0 installation, the MSA1500 Selective Storage Presentation shows for that server only one HBA instead of the two installed on server.<BR /><BR />The command spmgr set -a on WWN fails with the following error:<BR />AGENT_STATUS_UNKNOWN_ERROR<BR /><BR />HBA are FCA2214; the O.S. of the server is Win2000 SP4 and the MSA volume is correctly seen by the server with the available HBA.<BR /><BR />Does anyone helps about this ?<BR />thanks in advance<BR />kind regards<BR />Davide<BR /> Tue, 23 Aug 2005 03:15:13 GMT Davide Depaoli_3 2005-08-23T03:15:13Z https://community.hpe.com/t5/hpe-msa-storage/secure-path-and-msa1500-problem/m-p/3609322#M9619 Hi,<BR />my customer say that after the SP 4.0 installation, the MSA1500 Selective Storage Presentation shows for that server only one HBA instead of the two installed on server.<BR /><BR />The command spmgr set -a on WWN fails with the following error:<BR />AGENT_STATUS_UNKNOWN_ERROR<BR /><BR />HBA are FCA2214; the O.S. of the server is Win2000 SP4 and the MSA volume is correctly seen by the server with the available HBA.<BR /><BR />Does anyone helps about this ?<BR />thanks in advance<BR />kind regards<BR />Davide<BR /> Tue, 23 Aug 2005 03:15:13 GMT https://community.hpe.com/t5/hpe-msa-storage/secure-path-and-msa1500-problem/m-p/3609322#M9619 Davide Depaoli_3 2005-08-23T03:15:13Z