https://community.hpe.com/t5/msa-storage/unable-to-see-my-new-disks/m-p/457445#M977 Did you create an appropriate zoning?<BR />You can check if the fibre connection is OK if you can see the wwid of the fc cards at the switch level. Mon, 06 Dec 2004 04:26:37 GMT BR832640 2004-12-06T04:26:37Z https://community.hpe.com/t5/msa-storage/unable-to-see-my-new-disks/m-p/457444#M976 i have an ibm server running aix 5.2 with 2 fc cards connected to SAN (hsg80 in multibus failover)acs 8.7.3<BR /> i have added a raid storage unit to the SAN, builted my raid, and presented this unit to my ibm server. up to now every thing is ok.<BR /> typed at the server console : cfgmgr -v, the system does not discover anything.<BR /> when i entered the command : lsdev -Cc disk<BR /> the system is only displaying the old physical units (hdisk0,hdisk1,....hdisk6).<BR /> i don't know if i am missing something or what is the next step to be able to display the new raid i added ? i even restarted the server, still same thing. I am new to san with aix.<BR /> Please Help.<BR /> Thank you. Thu, 25 Nov 2004 20:23:36 GMT https://community.hpe.com/t5/msa-storage/unable-to-see-my-new-disks/m-p/457444#M976 CA1213027 2004-11-25T20:23:36Z https://community.hpe.com/t5/msa-storage/unable-to-see-my-new-disks/m-p/457445#M977 Did you create an appropriate zoning?<BR />You can check if the fibre connection is OK if you can see the wwid of the fc cards at the switch level. Mon, 06 Dec 2004 04:26:37 GMT https://community.hpe.com/t5/msa-storage/unable-to-see-my-new-disks/m-p/457445#M977 BR832640 2004-12-06T04:26:37Z https://community.hpe.com/t5/msa-storage/unable-to-see-my-new-disks/m-p/457446#M978 restarted the hsg80 and i now i could see the disk as hdisk6, created a new volume group, created the logical volume and affected it to the volume group. Everything seems to work fine.<BR />Thanx again. Mon, 06 Dec 2004 10:40:08 GMT https://community.hpe.com/t5/msa-storage/unable-to-see-my-new-disks/m-p/457446#M978 CA1213027 2004-12-06T10:40:08Z