https://community.hpe.com/t5/msa-storage/p2000g3-remove-all-disks-from-vdisk-without-loosing-data/m-p/6813631#M9785 <P>Hi all,</P><P>I've got a P2000 G3 with one Vdisk that consists of 12 hard drives with 2TB each. I now would like to replace those&nbsp;drives with 4TB ones. However, in case something goes wrong I would like to be able to re-install the 2TB drives and access data that is stored on them. Is this possible? If deleting the Vdisk, all data is lost - so can I maybe&nbsp;just remove all&nbsp;drive manually and create a new Vdisk with them?</P><P>Thanks,<BR />Michael</P> Tue, 24 Nov 2015 13:58:46 GMT sam bell 2015-11-24T13:58:46Z https://community.hpe.com/t5/msa-storage/p2000g3-remove-all-disks-from-vdisk-without-loosing-data/m-p/6813631#M9785 <P>Hi all,</P><P>I've got a P2000 G3 with one Vdisk that consists of 12 hard drives with 2TB each. I now would like to replace those&nbsp;drives with 4TB ones. However, in case something goes wrong I would like to be able to re-install the 2TB drives and access data that is stored on them. Is this possible? If deleting the Vdisk, all data is lost - so can I maybe&nbsp;just remove all&nbsp;drive manually and create a new Vdisk with them?</P><P>Thanks,<BR />Michael</P> Tue, 24 Nov 2015 13:58:46 GMT https://community.hpe.com/t5/msa-storage/p2000g3-remove-all-disks-from-vdisk-without-loosing-data/m-p/6813631#M9785 sam bell 2015-11-24T13:58:46Z