https://community.hpe.com/t5/msa-storage/problems-w-msa2000-g3-detecting-hosts/m-p/6857185#M9970 <P>Did you also create and present the correct type of Vdisk for an Alpha?</P> Fri, 06 May 2016 14:25:31 GMT Greybeard 2016-05-06T14:25:31Z https://community.hpe.com/t5/msa-storage/problems-w-msa2000-g3-detecting-hosts/m-p/6855055#M9965 <P>I have one host plugged into one controller at the moment, the host is an alpha es40 running fiber to the MSA. &nbsp;On the MSA I factory reset it got it on my network and added the hosts WWN. &nbsp;I am not sure why but it will not discover the host so I can not see the volumes I created on the ES40... Any advice would be greatly appreciated. &nbsp;Thanks.</P> Thu, 28 Apr 2016 17:43:30 GMT https://community.hpe.com/t5/msa-storage/problems-w-msa2000-g3-detecting-hosts/m-p/6855055#M9965 JustinDoss 2016-04-28T17:43:30Z https://community.hpe.com/t5/msa-storage/problems-w-msa2000-g3-detecting-hosts/m-p/6856237#M9966 Are the host ports on the MSA set to direct connect? (or fabric if there is a switch) Tue, 03 May 2016 16:07:23 GMT https://community.hpe.com/t5/msa-storage/problems-w-msa2000-g3-detecting-hosts/m-p/6856237#M9966 Johan Guldmyr 2016-05-03T16:07:23Z https://community.hpe.com/t5/msa-storage/problems-w-msa2000-g3-detecting-hosts/m-p/6857185#M9970 <P>Did you also create and present the correct type of Vdisk for an Alpha?</P> Fri, 06 May 2016 14:25:31 GMT https://community.hpe.com/t5/msa-storage/problems-w-msa2000-g3-detecting-hosts/m-p/6857185#M9970 Greybeard 2016-05-06T14:25:31Z