https://community.hpe.com/t5/storeeasy-storage/dl-380-array-controller-6i-array-configuration-utility-7-15-19-0/m-p/638294#M1023 You controllers will continue to report "Background Parity Initializing / queued" until you perform your first "write" to the drive. Formatting the drive in the OS should take care of the situation.<BR /><BR /><BR />Steven Mon, 20 Mar 2006 20:27:59 GMT Steven Clementi 2006-03-20T20:27:59Z https://community.hpe.com/t5/storeeasy-storage/dl-380-array-controller-6i-array-configuration-utility-7-15-19-0/m-p/638293#M1022 I try to create a new logical drive with Array configuration utility. <BR /> I configure this in RAID 5 and when i look more information the status is always in : Background Parity Initializing / queued.<BR /> The controller state is always active.<BR /> So ! perhaps there are a problem with ACU ? or my configuration is bad ?<BR /> <BR /> Thank you Mon, 20 Mar 2006 17:09:10 GMT https://community.hpe.com/t5/storeeasy-storage/dl-380-array-controller-6i-array-configuration-utility-7-15-19-0/m-p/638293#M1022 Amouroux Laurent 2006-03-20T17:09:10Z https://community.hpe.com/t5/storeeasy-storage/dl-380-array-controller-6i-array-configuration-utility-7-15-19-0/m-p/638294#M1023 You controllers will continue to report "Background Parity Initializing / queued" until you perform your first "write" to the drive. Formatting the drive in the OS should take care of the situation.<BR /><BR /><BR />Steven Mon, 20 Mar 2006 20:27:59 GMT https://community.hpe.com/t5/storeeasy-storage/dl-380-array-controller-6i-array-configuration-utility-7-15-19-0/m-p/638294#M1023 Steven Clementi 2006-03-20T20:27:59Z