topic Re: MV2020 software in StoreEasy Storage

MV2020 software

Bill Hague — Sun, 19 Aug 2007 09:43:47 GMT

Hi.
I have recently bought an MV2020, but am having great difficulty with the attached NTI BackupDrive! software, and not getting much help from the HP Total Care support service! It is now 4 weeks since my original email support request!!
After loading the software from the disc provided, the NTI software would not start up.
I was sent a URL for an FTP site for a software update, which duly arrived, but on loading and starting, I had an error message "Fatal Exception: Required HP Media Vault software key
Install Path Root not found." There does not appear to be any uninstall provision in the software. Further enquiry of HP Total support got a "making further enquiry response" and since then nothing.
I noticed on the website today that there was a ?new software update, but on checking the FTP site, this was a 0kb file! HP are not doing too well here!!
NTI have suggested using the Windows Clean-up utility, but this does not recognise my NTI installation.
I am running XP SP2 on two different computers, and both are having the same problems.
At least, I can see the Media Vault from both computers and have been able to back up to it using a different program. I have also been able to install the latest firmware 1.3.5.9.
Any suggestions would be most helpful.
Is anyone senior from HP reading this?
Bill

Re: MV2020 software

peyrache — Mon, 20 Aug 2007 06:42:31 GMT

hello
should be better to post on tape forum
than nas
JYP

Re: MV2020 software

Bill Hague — Mon, 20 Aug 2007 08:03:20 GMT

Thanks Jean-Yves.
The MV2020 is NOT a tape drive, but is a true NAS!!
It did not therefore seem appropriate to post in a tape forum.
Cheers
Bill

Re: MV2020 software

peyrache — Mon, 20 Aug 2007 08:12:31 GMT

ok, i didnt now this nas yet..
what was error message at first installation of nti software ?
what is the ftp location for the software
JYP

Re: MV2020 software

Bill Hague — Mon, 20 Aug 2007 08:17:55 GMT

Thanks Jean-Yves for your quick reply: faster than the HP team!
The ftp location was ftp.hp.com/pub/softlib/software8/COL16659/dv-43908-1/hpmediavaultupdate.exe
The Error message was "Fatal Exception: Required HP Media Vault software key
Install Path Root not found."
Cheers
Bill

Re: MV2020 software

peyrache — Mon, 20 Aug 2007 09:20:38 GMT

Bill
i need to lnow error message during NTI software startup ?
because i think you need a license or key to install now version of media vault
that is another story, the root cause
is the installation issue oF NTI
we need to troubleshoot that first
JYP

Re: MV2020 software

Bill Hague — Mon, 20 Aug 2007 19:50:18 GMT

Yes, Jean-Yves
The message comes as the NTI program is starting up.
The Media Vault set up has happened OK off the set-up disk, and the original OEM NTI software is also on the disk.
Cheers
Bill

Re: MV2020 software

peyrache — Tue, 21 Aug 2007 05:53:52 GMT

this error message appeared after software
upgrade or not ?
do you have in your hand licence document
provided by HP for NTI products ?
JYP

Re: MV2020 software

Bill Hague — Tue, 21 Aug 2007 08:04:05 GMT

Hello again
The error message appeared after loading the update, but the software was not working before that. HP therefore sent me a link to the previous update, which is the one that is not working and gives the error message.
Both sets of software came on the disk provided by HP: there is a EULA on the disk. What do you need from this?
Bill

Re: MV2020 software

peyrache — Tue, 21 Aug 2007 08:18:35 GMT

could you quick restore the mv2020
i hope you do have CD/DVD quick restore
then after Mv2020 will get a default configuration and we can see exactly what is the initial issue
JYP

Re: MV2020 software

Bill Hague — Tue, 21 Aug 2007 09:12:57 GMT

Not sure what you mean by a quick restore

Re: MV2020 software

peyrache — Tue, 21 Aug 2007 09:21:16 GMT

media to restore mv2020 disk image

http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&cc=us〈=en&dlc=en&product=3193058

JYP

Re: MV2020 software

Bill Hague — Tue, 21 Aug 2007 09:32:36 GMT

I am actually using XP SP2, as previously mentioned.
If you look at the page http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&cc=us&dlc=en&product=3193058〈=en
you will find where the software update is, or rather isn't, that I have been hoping to find!
Do you need me to download the image file from there?
Is it the 83 Mb file (as opposed to the 181 Mb file)?
Bill

Re: MV2020 software

Bill Hague — Tue, 21 Aug 2007 09:36:14 GMT

By the way, the webpage is out of date in respect of the new firmware, which was automatically downloaded for me, and which is now on the MV2020 OK.
How does this affect what you want me to do?
Bill

Re: MV2020 software

peyrache — Tue, 21 Aug 2007 09:45:36 GMT

you need to order 2 first CD on the top of the page (normally given with mv2020)
restore operation is described in user guide

Re: MV2020 software

Bill Hague — Tue, 21 Aug 2007 09:49:12 GMT

Will my original disk not be satisfactory?

Re: MV2020 software

peyrache — Tue, 21 Aug 2007 09:52:04 GMT

do you have already cd/dvd to restore ?
thanks
JYP

Re: MV2020 software

Bill Hague — Tue, 21 Aug 2007 10:28:12 GMT

Well it's the original disk that came with the hardware.
Is that what you mean?
(I have to stop now as it is 0100 am here in Australia!! Chat further tomorrow.)
Bill

Re: MV2020 software

peyrache — Tue, 21 Aug 2007 10:30:02 GMT

yes right media coming with hardware or order from HP Web
JYP

Re: MV2020 software

Bill Hague — Wed, 22 Aug 2007 08:47:36 GMT

Hi JYP, Hope you are online.
I have the disk with me.
Do you want me to try reloading all the software or just that for the NTI BackupDrive 4! and Shadow programs.
As I previously mentioned, there is no uninstall utility for the main program, nor is there any reference to it in Control Panel Add/remove programs. NTI BackupDrive 4! and Shadow can be removed by the latter.
let me know
Bill